|
|
||||||
|
|
|
|
Description
Our window regulator offer value without compromising quality. It with premium material and solid construction, ensures high strength and reliability. They direct fit -No missing holes, hardware or mounting brackets. It has been 100% tested for RPM, rotational direction, amperage and torque before shipment.
Highlights include
Your "Right Part" Checklist
Use the compatibility chart to identify your vehicle.
Visually compare the part you are replacing with our pictures.
Match reference numbers from the Item specifics section above.
Find the year,make, model, engine and trim in vehicle application to ensure.
Part Number
748-200 748-201
Fitting for the following vehicles
2005-2011 Cadillac STS
Package
1 pair of Window regulator with Motor in a box
Install the window regulator as follows:
Part1 Disconnecting the Window from the Motor
1.Remove the interior door panel.
2.Gently remove the plastic door cover.
3.Locate the window mounting bolts.
4.Move the window if necessary to access the bolts.
5.Remove the bolts while a friend supports the window.
6.Raise the window up into the door frame.
7.Use masking tape to secure the window in place.
Part2 Disconnecting the Motor and Regulator
8.Remove the window regulator bolts.
9.Locate and remove the window motor mounting bolts.
10.Disconnect the motor wiring harness connector.
11.Remove the motor and regulator through the access port.
12. Connect the regulator to the new motor.
Part3 Installing a New Power Window Motor
13.Slide the new motor and regulator back into place.
14.Replace the mounting bolts.
15.Reconnect the electrical connector.
16.Remove the masking tape and lower the window back down.
17.Insert the window mounting bolts.
18.Reinstall the plastic liner and interior panel.
Warranty:
This product is covered by our 1-year warranty.
If a failure occurs due to a manufacturing defect during the expected use, we will replace the part free of charge
Item Specifics | |
---|---|
Brand | afpaparts20 |
Manufacturer Part Number | AFP842755A01 |
Fitment Type | Direct Replacement |
Surface Finish | Smooth |
Placement on Vehicle | Front Left,Front Right |
Window Operation | Power |
Interchange Part Number | 15291744, 25709969,25999738 |
Type | Window Regulator |
Motor Included | Yes |
Product Fit | Direct fit |
Attachment Type | Bolt On |
Housing Material | Steel |
Gear Material | Plastic |
Frame Material | Metal and Plastic |
Window Mechanism Part | Window Motor |
Number of Pieces | 1 Pair |
Superseded Part Number | 15291743, 25709968 ,25999739 |
Fit For | For 2005-2011 Cadillac STS |
Custom Bundle | Yes |
Bundle Description | 2 Power Window Regulator |
Installation Instructions Included | No |
Warranty | 1 Year |
Fitment(Note) | Verify this part fits your vehicle using the compatibility chart |
Modified Item | No |
Package Contents | 2 Power Regulator |
Packaging Type | Box |
Mounting Hardware Included | No |
Weight | about 12 lbs |
Surface lubrication | Yes |
Package Size | 22.44*14.17*5.91(inch) |
We will leave positive feedback to buyer as soon as buyer pays for the item. Leaving Negative feedback or Netural Feedback is never a good way to resolve problem .We hightly appreciate that you can refer to us before you leaving Negative feedback or Neutral feedback .We will offer help to resolve your problems as fast as possible.
Any questions, pls contact us
Shop Category Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
Fits Cadillac STS 2011-2005 Window Regulator with Motor Pair Front Left Right
Description
Highlights include
Your "Right Part" Checklist
Use the compatibility chart to identify your vehicle.
Visually compare the part you are replacing with our pictures.
Match reference numbers from the Item specifics section above.
Find the year,make, model, engine and trim in vehicle application to ensure.
Part Number
748-200 748-201
Fitting for the following vehicles
2005-2011 Cadillac STS
Package
Install the window regulator as follows:
Part1 Disconnecting the Window from the Motor
1.Remove the interior door panel. 2.Gently remove the plastic door cover. 3.Locate the window mounting bolts. 4.Move the window if necessary to access the bolts. 5.Remove the bolts while a friend supports the window. 6.Raise the window up into the door frame. 7.Use masking tape to secure the window in place.
Part2 Disconnecting the Motor and Regulator
8.Remove the window regulator bolts. 9.Locate and remove the window motor mounting bolts. 10.Disconnect the motor wiring harness connector. 11.Remove the motor and regulator through the access port. 12. Connect the regulator to the new motor.
Part3 Installing a New Power Window Motor
13.Slide the new motor and regulator back into place. 14.Replace the mounting bolts. 15.Reconnect the electrical connector. 16.Remove the masking tape and lower the window back down. 17.Insert the window mounting bolts. 18.Reinstall the plastic liner and interior panel.
Warranty:
This product is covered by our 1-year warranty. If a failure occurs due to a manufacturing defect during the expected use, we will replace the part free of charge
All rights reserved. |