Full Automatic Chicken Coop Reverse Polarity Door Gate Opener 7…35VDC 10A LIGHT SENSOR

Reverse <> Forward Motor Controller for Dusk to Dawn

This device is a fully automatic chicken coop door gate opener with a reverse polarity feature that operates on the wide voltage input 7…35V DC and current up to 10A using a light sensor. It is suitable for controlling small electric doors, such as chicken coops, garages, and gates, but requires a linear actuator motor (not included). The controller has two built-in timers, one for opening and one for closing the door, and each timer can be adjusted from 0 to 25 seconds by reversing the polarity. Additionally, it comes equipped with a light sensor that can automatically open and close the door at sunrise and sunset with adjustable sensitivity. The device has LED indicators that show the direction and status of the timer.

Details:  

Dimensions:- length -  95mm- width 60mm- height 25mm

Power supply - 7...35V DC.

Relay maximum current 10 Amps.

Have protection against reverse supply voltage.

Input Voltage = Output Voltage

To operate the device, connect the power supply and the linear actuator (maximum 10A). Please follow to the wiring schematic. To set the light sensitivity, rotate the sensitivity trimmer. Then with trimmer TIMER1 set time in seconds for motor activation in forward direction.  With trimmer TIMER2 set time in seconds for motor activation in backward direction.  When the light sensor receives sunlight, the module supplies voltage to the motor in forward direction for the set timer 1, after which the motor stops. When the light sensor is exposed to darkness, the motor receives reverse voltage and starts in backward direction for the set timer 2 before stopping. This process will repeat until the module is powered off.