Creality Original Ender 3 Bed,Ultra-Flexible Removable Magnetic Build Plate, 3D Printer Build Surface for Ender 3 Pro/Ender 3 V2/ Ender 5/ Ender 5 Pro/Cr 20/CR 20 Pro, 235X235MM
Description
| Item model number | platform001 |
| Color | Original |
| Brand | Mefine |
| Material | PC lamination soft magnetic |
| Compatible Devices | Laptop, Smartphone |
| Item Weight | 12.63 Ounces |
| Package Dimensions | 10.51 x 9.76 x 0.43 inches |
| Manufacturer | Creality |
- Easy to Remove the Print: The preferred choice for 3D printer heated beds, just print on the magnetic construction board, remove the upper magnetic surface, carefully bend it, and watch the model fall into your hands. VS. tempered glass, it adheres better and is easier to fix, no more worrying about being broken. VS. carbon-silicon glass, it is more affordable and easier to remove the model.
- Excellent Performance: The magnetic bed is highly flexible and heat resistant, up to 70°C without demagnetization. The heating speed is fast and uniform, ensuring that the bottom of the finished model is delicate and not warped. It is durable, easy to clean and can be used repeatedly.
- Easy to Install: The build surface consists of an upper magnetic build surface and a lower magnetic adhesive base. Place the lower 3M adhesive surface on top of the 3D Printer build plate then you can start to print your models.
- Customizable: This magnetic bed replacement can be easily cut to any size. Suitable for all FDM printer models, as well as all heated and unheated 3D printer beds. Suitable materials: PLA
- Note: Before installation, please make sure the bottom of the soft magnetic adhesive is firmly attached to the upper layer, if it cannot be attached, please rotate 90 degrees and try again until it is fully attached.Please don't use acetone to wipe the thin layer left by the models.
Product Description
Creality Original ender 3 Magnetic Build Plate
The flexible soft magnet platform has strong flexibility and can be bent to take out the model. Models can be removed by directly separating the surface. Composite magnetic material with strong magnetic force, non-demagnetizing, easy to adhere, can be glued, and easy to pick. This Creality magnetic bed is suitable for Ender 3/Ender 3 Pro/Ender 3 V2/ Ender 5/ Ender 5 Pro/CR 20/CR 20 Pro and other FDM 3D printer heated beds.
Attention: It is not for PLA plus（PLA+).
Black frosted surface Coarse sand designThe surface of black frosted with coarse sand has strong flexibility and heat-resistance. Easy to stick and remove the model |
Easy to RemoveDesigned for model easy removal. Just print on the surface, remove the upper magnetic surface, bend the flexible surface, and watch the model fall right into your hands. |
Easy to be Installed and RemovedTear the gum, flatten the sticker without bubbles and direct adhesion. Down to print after simple adjustment. |
Instructions for Use
The ender 3 build plate is divided into two parts A (top) + B (bottom)
- Part A: Frosted surface at the top, magnetic at the back (interaction with the front of part B plays an attractive role). Black frosted surface with coarse sand pattern, flexible, high temperature resistant, easy to stick and demould.
- Part B: The top is magnetic (adsorption under part A), the back is adhesive (stick on the printer platform, play a fixed role)
If the adsorption fails, please rotate 90 degrees and try again.
Attention
- Please wipe the surface with isopropyl alcohol or other low residue cleaner before use to remove any outer film or dust that may have accumulated after manufacture.
- This Ender 3 print bed is intended for use with PLA filaments only, not for PLA plus（PLA+). Use of any filament with a high shrinkage coefficient may cause failure or a decrease in magnetic force over time. This will not prevent prints from warping.
- This 3d printer magnetic build surface is not intended for use in high temperature printing applications exceeding 70 degrees Celsius.
If you have any unsolvable problems during installation or use, our technical team will provide you with detailed solutions within 24 hours.
Package List :
1x 3D Printer Magnetic Build Surface.
Advantages
- Designed with model removal in mind, separation type bending to take off the model.
- VS. tempered glass, it adheres better and is easier to fix, no more worrying about being broken.
- VS. carbon-silicon glass, it is easier to remove the model and Best-Value-for -Money.
- Can easily be cut to any demensions making it perfect for all build sizes.
| Customer Reviews |
4.8 out of 5 stars
608
|
4.2 out of 5 stars
345
|
—
|
4.4 out of 5 stars
300
|
4.6 out of 5 stars
340
|
4.8 out of 5 stars
26
|
|---|---|---|---|---|---|---|
| Price | $11.49$11.49 | $39.00$39.00 | — | $9.99$9.99 | — | — |
| Size | 235*235 | 235*235 | 235*235 | |||
| Fit For | Ender-3, Ender-3 Pro, Ender-3 V2, Ender-5, Ender-5 Pro,CR-10, CR-10S, CR-20, CR-20 Pro and Other Similar 3D Printers | Ender-3, Ender-3 Pro, Ender 3 Max, Ender-3 V2, Ender-5, Ender-5 Pro, CR-10 3D printers with 32 Bit V4.2.2/V4.2.7 Mainboard | Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 V2 Neo, Ender 3 Neo | Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro,Voxelab Aquila, Geeetech A10 series, Artillery Genius, BIQU-B1 | Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro,Voxelab Aquila, Geeetech A10 series, Artillery Genius, BIQU-B1 | Ender 3, Ender 3 Neo, Ender 3S, Ender 3 Pro, Ender 3 V2, Ender 3 V2 Neo, Ender 5, Ender 5 Pro |
| Type | Bowden Tube | Auto Bed Leveling Kit | LED Light Bar | Print Bed | Print Bed | PEI Build Plate |
ABOUT US
We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more.
SHIPPING
We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control.
We offer free shipping to the lower 48 states and ship within 2 business days of payment, usually sooner. We do not accept P.O. Boxes. Please provide a physical address.
RETURNS
We offer a 30-Day Return Policy on items which you are not completely satisfied with. You have the option for a full-refund or an exchange of the item. No returns are available on items shipped outside of the USA.
PAYMENT
We accept PayPal.
CONTACT US
This page content is yet to come
Please ad us to your favorite seller and visit again later
Thank You
CUSTOMER SATISFACTION
We try our very best to make sure every customer is completely satisfied. If there's a problem, message us! We're happy to help.