2.  Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.

Launch X431 GIII X-PROG 3 Advanced Immo-bilizer & Key Progarmmer XPROG 3 Chip Reader

X-PROG 3 advanced immobilizer & key Progarmmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.

Highlights:

1. All-in-One Key Progarmmer. Integrates Multiple Function Models
2. Reads & Writes Most Engine/ Gearbox E-C-Us Without Disassembling the Shell
3. Compatible with Multiple X-431 Series Diagnostic Tablet: X-431 V, X-431 V+, X-431 PAD V, X-431 PAD VII, X431 PRO 5, X431 PROS V4.0, etc
4. Supports V-W/ AUDI MQB Platform Engine E-C-U Replacement or Cloning (Read engine E-C-U data directly from the key).
5. Works with ReProgarmming Device to Backup/ Restore Progarmming Data (For Bosch/Siemens engine E-C-U).
6. Enables Reading/ Writing EEPROM, On-Board MCU and For BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading for BMW Engine ISN Code.



Launch GIII X-Prog 3 Features:

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/ writing EEPROM, on-board M-CU and for BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading for BMW engine ISN code.
2. Supported brands: Fit For V-.W, for AUDI, for SKODA, for SEAT, for BMW, for MERCEDES-BENZ, for TOYOTA, etc. More models continue to be updated.
3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, L.-ock System, etc.
4. Compatible with: X431 V, X431 V+, X431 ProS, X431 PRO GT, X431 PRO V4.0, X431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
5. Reads & writes most Engine/ Gearbox E-C-Us without disassembling the shell



Update Note:
Launch X431 GIII X-Prog 3 latest update for RESET PROG (V10.05) Function:

1) Added E-C-U reading and writing functions for 10 models of Siemens Engine including MSD80, MSD81, MSD85, MSD87, MSV90, SIM271DE, SIM271KE, SIMOS8.4, SIMOS8.5 and SIMOS8.6;
2) Added E-C-U reading and writing functions for 5 models of Transmission including 9G_Tronic, DQ380, AL551, AL450 and 8HPXX.

Launch GIII X-Prog 3 Advantages:

1. Supports V-.W/AUDI MQB platform engine E-C-U replacement or cloning (Read engine E-C-U data directly from the key).
2. Supports V-.W/AUDI MQB platform gearbox E-C-U replacement or cloning.
3. Supports E-C.U replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the E-C-U for the fourth-generation of V-W UDS engine.
5. Supports for BMW E chassis 8HP gearbox E-C-U reProgarmming to empty.
6. Works with reProgarmming device to backup/restore Progarmming data (For Bosch/Siemens engine E-C-U).



Supported Brands

Fit For V-W, For Audi, For Skoda, For SEAT, For BMW, For Mercedes-Benz, For Toyota… (updates to be continue)

Supported Systems

Engine system, automatic transmission, instrument system, CAS, body system, l-ock system…

Compatible With 

X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII



Core Functions

1. Integrated the functions of key m-atching/ copy, anti-theft IC reading & writing, and E-C-U reading & writing, etc.
2. Supports common E-C-U/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports E-C-U replacement for all l-ost without disassembly for V-W/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports E-C-U replacement for the fourth-generation of V-W/ AUDI engine;
5. Supports E-C-U replacement for the fifth-generation of V-W/ AUDI Bosch and Siemens engines.
6. Supports the all l-ost and replacement for the fourth generation of AUDI EZS, comfortable E-C-U, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox E-C-U reProgarmming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the E-C-U cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
12. Supports V-W/ AUDI MQB platform engine E-C-U replacement or cloning (Read engine E-C-U data directly from the key).
13. Supports E-C-U replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
14. Supports reading, writing & cloning the E-C-U for the fourth-generation of V-W UDS engine.
15. Supports BMW E chassis 8HP gearbox E-C-U reProgarmming to empty.
16. Works with reProgarmming device to backup/ restore Progarmming data (For Bosch/ Siemens engine E-C-U).



Supported E-C-U MCU List: 
(Support more than 1000 models, keep updating)
 

Support EEPROM List:
support more than 1000 models, keep updating
 

How to Use X-PROG3 to Read and Write Data?

Method 1: Directly connect to OBD16 for key m-atching, data reading and writing, etc

Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer Progarmmer l-ocker and l-ock it to realize the data interaction between the IC anti-theft chip and the diagnostic host

Method 3: After removing the E-C-U from the car, connect the anti-theft E-C-U pin to the DIY slot of the immobilizer Progarmmer through the cable to realize the data interaction between the anti-theft E-C-U and the diagnostic host.



Launch X-Prog vs X-Prog 3
 

Specification:
 

Package List:

1pc x Launch X-PROG 3
1pc x Power adaptor
1pc x Main diagnostic cable
1pc x The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)
1pc x BE-NCH mode cable
1pc x M-CU converter V1
1pc x M-CU converter V2
1pc x M-CU cable with multiple leads
1pc x EEPROM chip adaptor
1pc x for Benz infrared analog acquisition key
1pc x M-CU cable with multiple leads
1pc x EEPROM converter
1pc x User Manual

Launch X431 M-CU3 Adapter for X-PROG3 GIII Work on Mercedes Benz All Keys L-ost and E-CU T-CU Reading

To progarm Mercedes all keys l-ost with X431 V, X431 V+, Pro5, Pros, Pro3S, X431 PAD V, PAD VII and X-PROG3 GIII, you will need to connect the M/CU3 adapter to X-PROG3 correctly.

Adapter board code: 307140131

Note: To Use this proeuct, Customer Must have GIII

Applications and advantages of the new M/CU3 adapter:

-ADAS Advanced Driving Assist System

-For Audi VW MQB gearbox replacement

-For BMW continental msv90 engine e-cu replacement and cloning

-For Peugeot Key Progarmming

-For Mercedes Benz transmission deleted and operating instructions vgs nag2 vgs2 nag2 and vgs3 nag2

-For Mercedes Benz w164 2009 Key Progarmming

-For V-olks.wagen Audi 5th generation engine reading engine data via direct connection and online progarmming and coding

-For BMW E chassis 8hp EGS deleted

-For BMW 8hp chassis F and G delete function

-Key progarmming cas4/cas4+ all keys l-ost and adding k-eys

-Progarmming cas1 cas2 cas3 cas3+ l-ost keys and add k-ey

-CAS4 immo-bilizer module replacement

-Replacement of V-olks.wagen Audi engine and reading data med17 and edc17

-For Mercedes Benz med9.7 e-cu deleted

-For V-olks.wagen Audi Replacement 4th Generation Instrument Replacement

-Engine replacement for V-olks.wagen Audi MED17.5.22

-Progarmming of l-ost keys and adding k-ey Porsche Cayenne 2011 2017

-Cloning and virginization e39 ac delco

-Power shift cloning and virginization

-For Nissan e-cu and Tcm conversion and virgin e-cu progarmming and calibrations

-Special features in Chrysler and registration at autoauth FCA sgw

-Special features in GM and Ford 

Connection Diagram:

When is it can be used?

1. Use the BENCH mode to clone the E-CU module, when the 120 ohm resistor is connected as shown in Figure 1, or when the +12V power supply is connected to the IMMO progarmmer board; the IMMO progarmmer M/CU3 adapter board (with its own power supply) can be used, as shown in Figure2.

Figure 1:

Figuire 2:

2. With all keys l-ost for Mercedes-Benz, and the connection for key learning is shown in Figure 3 when operating on the platform.

Figuire 3:

Package Includes:

1pc x IMMO progarmmer MC/U3 adapter board kit