Laser ranging sensor industrial module high precision TTL/485/RTU 4-20ma 0-10V analog
Laser ranging sensor
PLC programming networking
PLC programming networking
Laser ranging sensor product introduction:
The self-developed USB-TTL/STC-ISP in-circuit programmer uses the USB interface for notebook computer users
To solve the problem that there is no serial port and it is inconvenient to program STC series microcontrollers, this downloader has low price and high performance, and is the first choice for factories, schools, individuals, etc. to develop STC series microcontrollers.
Features:
1. Support USB1.1 or USB2.0 communication;
2. Fully support WIN98, WINME, WIN2000, WINXP, VISTA, WIN7 and other operating systems;
3. Powered by USB port, there is a 500mA self-recovery fuse or fuse resistor in the board to protect the computer motherboard from accidental burnout;
4. When programming the chip, you can use the power of the target system itself, or you can use the programmer to take power from the USB port to supply the target board, but the target current should be ensured not greater than 500mA, so as to avoid normal programming;
5. The completion of programming does not affect the program operation of the target board;
6. Support STC full series chip programming;
7. The programmer provides 3.3V and 5V voltage output interfaces;
8. The speed is faster and more stable than parallel port programming, which is more convenient for notebook computer users;
9. Using imported original chips, it can perform high-speed and stable programming; Power supply range:
VCC: 3~3.3VDC Current: 100mA
To solve the problem that there is no serial port and it is inconvenient to program STC series microcontrollers, this downloader has low price and high performance, and is the first choice for factories, schools, individuals, etc. to develop STC series microcontrollers.
Features:
1. Support USB1.1 or USB2.0 communication;
2. Fully support WIN98, WINME, WIN2000, WINXP, VISTA, WIN7 and other operating systems;
3. Powered by USB port, there is a 500mA self-recovery fuse or fuse resistor in the board to protect the computer motherboard from accidental burnout;
4. When programming the chip, you can use the power of the target system itself, or you can use the programmer to take power from the USB port to supply the target board, but the target current should be ensured not greater than 500mA, so as to avoid normal programming;
5. The completion of programming does not affect the program operation of the target board;
6. Support STC full series chip programming;
7. The programmer provides 3.3V and 5V voltage output interfaces;
8. The speed is faster and more stable than parallel port programming, which is more convenient for notebook computer users;
9. Using imported original chips, it can perform high-speed and stable programming; Power supply range:
VCC: 3~3.3VDC Current: 100mA
technical parameter:
1. Measuring range: 0.03—80 meters
2. Measurement accuracy (standard deviation): ±1.mm
3. Distance unit: m
4. Laser type: 635nm
5. Laser class: Class II, <1mW
6. Spot diameter at distance m: 6mm@10m, 30mm@50m
7. Protection class: IP40
8. Working temperature: -20~+70℃
9. Storage temperature: -20~+80℃
10. Weight: about 60g
11. Dimensions (L×W×H): 4.5×3.8×1.5CM
Packing: 1PC
Warranty period: 120 days
Warranty period: 120 days
