433Mhz DC 5V-30V 1CH Universal Wireless Remote Control Switch Relay Receiver Module RF Transmitter 433Mhz Remote Control
Specifications:
Input Voltage: DC 5 ~ 30V
Quiescent Current: 5mA
Receiving Sensitivity: >97dbm
Remote control distance: Approx. 30 meter
Model switching: Momentary&Toggle
Frequency: 433 MHZ
Receiver size: 35x31.5x17mm
Remote control size: 50 x 50 x 13mm
Remote control battery: 2* CR2016 batteries (Included)
Wiring type: ixed terminal
+V : DC5 ~ 30V "+" input ;
 - V: DC5 ~ 30V "-" input ;
 NO: Output , normal open;
 COM: Output , common ;
 NC: Output , normal close.

Features:
1. Fixed On The Wall For Use: You can stick the remote control on the wall so thatyou can open your garage door when you are not driving.
2. The remote control can be installed anywhere on the wall and does not require wires, it can make our lives more convenient.
3. More intelligent design can make our lives more convenient.

Instruction Manual:
1. Clear code: Press the Learning Button on the receivers for 8 times, the codes will be cleaned,After cleaning the code, all the remote control cannot work any more.
2. Learning the Code:(Momentary)
Press the learning key on the receiver once time, it comes into momentary setting mode, Wait for a moment, the LED will be off, it comes into learning state,
Push the remote button, LED indicator on the receiver board will flash then come off, After 3 seconds, the LED indicator will be on again, learning successfully
Learning the Code: (Toggle)
Press the learning key on the receiver twice time, it comes into toggle setting mode.
Wait for a moment, the LED will be off , it comes into learning state.
Press the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, learning successfully.

Package Includes:
1X Receiver
1X Remote control(Included 2* CR2016 batteries)

Note:
*For your convenience, the remote control and receiver have been paired.
*Don't operate control buttons rapidly and frequently , because the controller is controlled.
by microprocessor , each operation state will response in 1second.
*If discover the LED lights darken or remote distance shorter, please replace the battery.