HI THANK YOU FOR LOOKING AT MY LISTING

THESE ARE A SLIGHTLY SHORTER VERSION FOR THE SMALLER VANS.

FROM THE CENTRE OF THE TOW BAR TO THE OUTER MOST PART OF THE STEEL IS 855mm AND FROM CENTRE OF TOW BAR TO PIVOT POINT IS 815mm

I DO A SLIGHTLY LONGER VERSION FOR BIGGER VANS PLEASE CHECK MY OYHER LISTINGS.

THIS IS AN E BAY PRICE MESSAGE ME AND I CAN DO A LOT BETTER PRICE DIRECT OR CHECK OUT MY WEBSITE

CLOSE-INNOVATIONS.COM

THIS IS FOR 1 SWING OUT TOW BAR FRAME AS IN THE PICTURES, BIKE RACK IS NOT INCLUDED.

THE PURPOSE OF THE FRAME IS TO MAKE ACESSING THE REAR DOORS OF THE VEHICLE WITHOUT THE HASSLE OF HAVING TO REMOVE THE BIKES PRIOR TO DOING SO.

THESE FRAMES ARE DESIGNED TO BOLT TO AN EXISTING 4 BOLT TOWBAR FLANGE ALTHOUGH THEY CAN WORK ON A 2 BOLT FLANGE JUST FINE WITH AN ADDED SUPPORT BRACKET, THE BOLT HOLE AND LENGTH MEASUREMENTS ARE PICTURED.

THE SWING OUT ARM IS SECURED IN PLACE WITH A LOCKING PIN WHEN CLOSED, THE ARM PIVOTS ON 2 X ROLLER BEARINGS AND STAINLESS STEEL PIN WITH ADJUSTER AND IS HELPED TO SWING OUT AND STAY IN PLACE WITH THE FITTED GAS RAM.

THERE IS AN ADJUSTER ON THE LOWER OF THE HINGE PIN SO THE ARM CAN BE ADJUSTED TO COUNTERACT THE WEIGHT OF RACK AND BIKES SO IT CLOSES NICE AND SMOOTH.

ALL THE FRAMES ARE HOT DIP GALVANISED AND THEN POWDER COATED WITH STAINLESS STEEL FIXINGS WHERE POSSIBLE.

THE FRAMES ARE SUPPLIED WITH EITHER 7 or 13 PIN ELECTRICS JUST LET ME KNOW WHAT YOU REQUIRE AT TIME OF PURCHASE.

AS A SAFE WORKING LOAD I ALWAYS SAY AROUND 60KG WITH BIKES AND BIKE RACK ALTHOUGH THE FRAME CAN HANDLE MORE BUT MAY JUST REQUIRE A LITTLE LIFT AS ITS PUT INTO THE LOCKING POSITION, SO THAT SAID IT CAN ACCOMODATE 2 E-BIKES NO PROBLEM AT ALL.

THE FRAMES DO BENEFIT FROM AN ADDITIONAL BRACKET NEAR THE HINGE END TO THE TOW BAR ON THE VEHICLE, THESE NEED TO BE MADE UP AFTER THE FRAME IS FITTED DUE DO THE MASSIVE VARIATION OF TOW BARS. ANY DECENT GARAGE, FAB SHOP OR TOW BAR FITTER WILL BE ABLE TO DO THIS.

I BUILD THESE FRAMES MYSELF AND ALSO WORK AWAY A FAIR BIT SO PLEASE CONTACT ME FOR A DELIVERY TIME FRAME, NORMALLY CAN BE DELIVERED WITHIN A WEEK BUT JUST CHECK TO BE SURE.

THE EXISTING ELECTRIC SOCKET ON THE VAN WILL NEED RELOCATING LIKE IN THE PICTURE.

TOTAL WEIGHT OF THE FRAME WITH FIXTURES AND FITTINGS IS ROUGHLY 30KG.

I CAN BUILD 1 OFF DESIGNS TO SUIT YOUR REQUIREMENTS SO PLEASE CONTACT ME WITH ANY IDEAS YOU HAVE AND WILL SEE WHAT I CAN DO.

ANY QUESTIONS AT ALL PLEASE FEEL FREE TO CONTACT ME AND ALSO SEE WHAT DEAL WE CAN COME TO. 

**THESE ARE NOT FOR TOWING WITH**