This sale is for an Alinco DX-R8T communications receiver that is no longer available to purchase as new. The receiver is in gently used condition and shows only minor/minimal signs of ownership.
Please note that this receiver was sold by Alinco without a power supply, but does have the EDC-37 cord to connect to any DC power supply that you may already own or will acquire. Also included with this receiver is the user manual and copies of various sale sheets and reviews for you to read and enjoy and plus a CD that contains a lot of files of reviews, the brochure, and the user manual.
Operationally, we
fully tested the receiver and it performs beautifully on various bands and
in the many receiving modes. The sensitivity was quite good and
we were able to verify this in a variety of amateur radio bands and shortwave
broadcast frequencies.
We would like to say
that this receiver is well made making generous use of metal in its construction.
While the front panel employs the use of plastic, the balance of
the unit is comprised of heavy gauge steel that gives a person a feeling that quality corners were not cut with its manufacture. Added to this is the fact that
the suggested retail price of the DX-R8T is just about $600 (less power
supply) and you then have a receiver that is affordable to many buyers that
cannot own a selection from the elite group of receivers. But that said
and considering cost, the features and appointments on this receiver are
impressive.
If you study the front
panel, one of the first things that you will notice is that there are a lot of
double-function buttons. This sort of design enables the receiver to
occupy a smaller footprint on your desktop, but also to allow access to
features instead of leaving them off due to lack of panel space. Also,
the display is larger and easy to read for viewing frequency and operational
information. The tuning knob is large and has a pleasant feel to it. If
you spin tuning knob, you will notice that it moves easily with a flywheel
effect. However, if you move it slowly, you will also be able to tune with
precision. The front panel features a forward facing speaker that is
important in hearing signals as it allows the sound to be directed toward you
making discerning signals easier to copy.
When using the
receiver, we noticed that it has two filters for AM shortwave program
listening....a 9 KHz wide filter and a 2.4 KHz narrow filter. The wide
filter works well for most listening, but is too wide for strong nearby
stations that are often just 5 KHz away from adjoining frequencies. But the user has a couple of
features at their disposal that enables them to reject this side channel interference.
First of all, they can move the IF tuning to eliminate much of this side channel
interference. We did this on several occasions with excellent
results. Additionally, the RIT (rate incremental tuning) allows for
precise adjustment of the tuning slightly off frequency to help sidestep this
interference. Finally, should the interference be entirely too
overwhelming, you can use the narrow bandwidth filter in conjunction with the
IF tuning or RIT to clarify the signal.
Alternately with tuning AM signals to eliminate interference, DXer's and hobbyists have commonly used ECSS tuning (exalted carrier selectable sideband). To manage this, the operator would tune to a signal that they desire. If the interference is coming from the lower side of the tuned frequency, you would chose USB. You would then carefully tune the signal to eliminate any howl or distortion and thus clarify the signal. By tuning an AM signal on SSB, and in the case of our example USB, you would have a tool to listen to clear AM broadcasts, but utilizing sideband to eliminate interference.
We have
also known advanced DXers who prefer to listen to weak AM transmission
broadcasts in SSB as the sensitivity of the receiver is generally better using
SSB and thus very weak signals can often be heard using SSB that may not be
copied using AM mode. Included on the CD provided with this receiver is a
document in PDF that explains this process and how to tune the receiver
properly. Many serious DXers prefer the ECSS tuning over using AM
synchronous tuning.
Listening to the
maritime and amateur signals is very easy. Selection of the proper
sideband is a snap and the use of the 2.4 filter enables good copy on
SSB. If you lean toward the CW side of the hobby and like to copy code,
you can employ the use of the RIT to change the tone of the signal or to help
with selecting the desired signal from the crop of those hitting your
antenna. Additionally, there is a 500 Hertz audio filter to
help sort out the signals. Tuning the receiver VFO can be done
one of 3 ways....using the tuning knob, using the up/down arrows, and direct
keypad entry. The receiver also has 600 memories and, if you appreciate
storing your favorite frequencies this way, you can scan or choose to tune
using this method. There are 7 pages of detail in the user manual
explaining the use of memory selection, saving, searching, and tuning.
Here are some features
of this DX-R8T receiver:
As you can see, this
receiver is not short on features and will enable the user to enjoy listening
to signals from the longwave thru the mediumwave and into the shortwave
bands. The frequency stability is an amazing one part to million and was
formerly found only on the most expensive commercial receivers. As
mentioned briefly in the list above, the front panel detaches and allow for
remote operation (see picture at top of the listing). Thus, if you wanted
to use the receiver in your automobile, you could place the main console in
your trunk and mount the front panel where it is accessible. A 16' cable
is required for this and is sold separately elsewhere.
We could spend a great
deal of time reviewing this receiver for you, but there are other very qualified
people who have done so with thoroughness and if your desire is to read more
about this receiver, it seems wise for us to just offer you these following
links:
https://youtu.be/K0U5X0lj8Ls (Eric at Universal
Radio does a wonderful review - copy and paste link into your browser)
https://swling.com/blog/2011/09/alinco-dx-r8t-review/ (copy and paste this link into your internet
browser)
https://web.archive.org/web/20170110171350/http://www.dxer.ca/articles/91-alinco-dx-r8t (copy and paste this link into your internet browser)
Please use the Ebay shipping calculator to determine your
shipping cost. This cost includes proper packing materials for safe
delivery and insurance cost against damage or loss.
Those buyers living outside the USA are also welcome to purchase
from us. We have shipped to 112 countries during the past 24 years on
Ebay and we are happy to ship virtually anywhere in the world. You may
use the shipping calculator to determine your shipping cost.
We ask that you remember that this cost may not include any import, customs, or VAT fees. If you are uncertain of these costs, we ask you to check with your local post office prior to making a purchase from us.
Thank you for taking the time out of your busy day to look at
our Ebay items!