Product View
Detail
1.90W high power, can make the soldering iron in 6 seconds to quickly warm up, fast tin, tin smooth, built-in thermostat chip, heat stability, with anti-scald protective cover
2. The iron can be precisely adjusted temperature, temperature range flexibility, up to 180 ℃ -480 ℃
3. Clear digital display: LED high-definition LCD screen display, more clearly display the temperature status, temperature gear at any time control
4. The use of thickened double-sided circuit board, heating to the specified temperature automatically stops heating, the use of the process of temperature drop in the chip induction will be heated again
5. Wide range of use: widely used in circuit board welding, home appliance repair, perfect for beginners, welders, basic household equipment, welding engineer training and so on.
1. The soldering iron working voltage adaptive AC220V
2. Power-on display “OFF” means off, press the “*” key for 2 seconds to power on.
3. After power on, press “+” or long press “a” to adjust the temperature, the adjustment range of 180 ℃ - 480 ℃.
4. Press “+” and “a” key at the same time to enter the temperature compensation adjustment, the adjustment range is earth 100 ℃/+180 F. The value is positive when the temperature increases, the negative value when the temperature decreases.
5. Quickly press the “*” key twice to switch the temperature unit.
6. Press “+” and “a” at the same time under the shutdown state to show the status of the hibernation switch, press the “+” key to open the hibernation function, press the “a” key to close the hibernation function. Press “+” key to turn on the hibernation function, and press “I” key to turn off the hibernation function. After the hibernation function is turned on, the handle without vibration operation for more than 10 minutes into the hibernation state, the iron does not heat up, display “----” and hibernation symbols, and then after 5 minutes there is still no operation will be shut down. When vibration is detected in the dormant state, it will resume normal operation immediately.
E-1: Heating core resistance is too low or circuit failure.
H-E: Heating core disconnected
E-3: Power supply voltage too high (over 270V)
E-4: Power supply voltage is too low
Model: digital display intelligent soldering iron
Rated power: 90W
Temperature range: 180 ℃ -480 ℃
Heating mode: ceramic heating core
Soldering iron wire length: 120mm
Product length: about 230mm
Power plug: 2 plugs
Soldering time: about 6 seconds
Function:℃/℉ switching
Voltage:AC220V
Display:LED high definition liquid crystal screen
Function:Temperature adjustment
Soldering iron*1
Accessory kit *1
We only accept your Ebay Address, Please Make sure it's 100% right.
The items you ordered will be shipped out in 3 business day by Hong Kong Air Mail when your payment is clear.
We maintain high standards of excellence and strive for 100% customer satisfaction!
Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutralor or negative feedback, so that we can satisfactorily address your concerns.
Copyright © 2017 DataCaciques
Product View
Detail
1.90W high power, can make the soldering iron in 6 seconds to quickly warm up, fast tin, tin smooth, built-in thermostat chip, heat stability, with anti-scald protective cover
2. The iron can be precisely adjusted temperature, temperature range flexibility, up to 180 ℃ -480 ℃
3. Clear digital display: LED high-definition LCD screen display, more clearly display the temperature status, temperature gear at any time control
4. The use of thickened double-sided circuit board, heating to the specified temperature automatically stops heating, the use of the process of temperature drop in the chip induction will be heated again
5. Wide range of use: widely used in circuit board welding, home appliance repair, perfect for beginners, welders, basic household equipment, welding engineer training and so on.
1. The soldering iron working voltage adaptive AC220V
2. Power-on display “OFF” means off, press the “*” key for 2 seconds to power on.
3. After power on, press “+” or long press “a” to adjust the temperature, the adjustment range of 180 ℃ - 480 ℃.
4. Press “+” and “a” key at the same time to enter the temperature compensation adjustment, the adjustment range is earth 100 ℃/+180 F. The value is positive when the temperature increases, the negative value when the temperature decreases.
5. Quickly press the “*” key twice to switch the temperature unit.
6. Press “+” and “a” at the same time under the shutdown state to show the status of the hibernation switch, press the “+” key to open the hibernation function, press the “a” key to close the hibernation function. Press “+” key to turn on the hibernation function, and press “I” key to turn off the hibernation function. After the hibernation function is turned on, the handle without vibration operation for more than 10 minutes into the hibernation state, the iron does not heat up, display “----” and hibernation symbols, and then after 5 minutes there is still no operation will be shut down. When vibration is detected in the dormant state, it will resume normal operation immediately.
E-1: Heating core resistance is too low or circuit failure.
H-E: Heating core disconnected
E-3: Power supply voltage too high (over 270V)
E-4: Power supply voltage is too low
Model: digital display intelligent soldering iron
Rated power: 90W
Temperature range: 180 ℃ -480 ℃
Heating mode: ceramic heating core
Soldering iron wire length: 120mm
Product length: about 230mm
Power plug: 2 plugs
Soldering time: about 6 seconds
Function:℃/℉ switching
Voltage:AC220V
Display:LED high definition liquid crystal screen
Function:Temperature adjustment
Soldering iron*1
Accessory kit *1
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.Usually, the package will be delivered in about 30 days, some remote areas may wait longer.
1.We accept PayPal payment, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback or open a case without asking for help.
2.Please DON'T leave negative / neutral feedback or open case if you haven't received item in 30 days, International shipping is uncontrollable, sometimes the package may be delayed, If you have't receive item in time, Please remember to contact us to resolve.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.