Part Number
can-am 705502546
705501723
705502178
705502090
Fit for the Following Models
2013-2018 Can-Am Outlander 1000
2019-2021 Can-Am Outlander 450/MAX 450
2015 Can-Am Outlander 800 R
2018-2021 Can-Am Outlander 850/1000R/570/650
2016-2021 Can-Am Outlander Max 1000 R
2017-2021 Can-Am Outlander Max 570
2016-2021 Can-Am Outlander Max 650/850/1000R
Specification
This is the XMR 1000 rear differential found in 2013-2018 1000/1000R XMR.
It is also used in the G2 800 XMR & 850 XMR.
It will fit g2 bikes (500/650/800/850/1000) if you are upgrading you will need to shorten your shaft
(G1 bikes will require further modifications to work).
This differential has automotive style cut gears, tapered roller bearings, along with an overall larger gear size.
There are a total of three bearings on the pinion gear giving it much more support over the standard rear differentials, this requires a shorter driveshaft, as mentioned earlier if you are swapping this in place of a standard differential.
Pinion spline count 20, standard differentials use 18 spline pinion shafts, that are smaller in diameter. In every way this is a beefier differential.
To bolt your driveshaft on this differential you will need a M10x1.25 16mm long bolt (not included)
Professional installation is highly recommended.
*Compatible table only for reference.
Please be aware that the vehicle compatibility list may not be 100% accurate. However, the OE number provided in our listing is. Match the result with the OE number we have in the listing that would be the best way to guarantee fitment.
Before Purchasing, please carefully check the OEM part number and illustrations to make sure it is compatible with your model. If you are not sure, please feel free to contact us. We are always here to solve any problems you may encounter, and we'll reply you as soon as possible.
Then, if you have any problems after purchasing, please contact us before opening a return or case. We will do our best to provide you with the best solution. Thanks for your understanding.