XY-WJ01 DC12V LED Digital Time Delay Relay Module Programmable Timer Trigger

This product LCD display, very clear, simple and easy to use, powerful, but please read user instructions carefully before using.
 
Note:
  • No manual, please contact us before purchase if you have any question
 
 
Packing List (bulk pack):
  • 1 x XY-WJ01 Delay Relay Module
 
Features:
  • Display with LCD two columns Can display parameters directly
  • Trigger mode: high and low level, switch quantity. meet most of the needs
  • Power supply: 6~30V
  • Parameters can be modified via UART
  • Stop button to provide emergency stop function
  • 5 minutes without any operation into a low-power state. Any action wake up
  • OP/CL/LOP params can be modified individually
  • All parameters are automatically saved by power off
 
Working Mode Instructions(P1~P7)
  • P0: After the signal is triggered, the relay conduction in OP time then disconnects; In the OP time, the signal is invalid.
  • P1: After the signal is triggered, the relay conduction in OP time then disconnects; In the OP time, the signal triggers a new timer.
  • P2: After the signal is triggered, the relay conduction in OP time then disconnects; In the OP time, signal trigger reset timer, relay disconnected and stop timing.
  • P3: After the signal is triggered, the relay disconnects the CL time, and then the relay conduction.
  • P4: After the signal is triggered, the relay conduction the OP time, and then the relay disconnects the CL time, and then loops the above action, gives the signal again in the loop, relays disconnect, stops the timer; and the number of cycles (LOP) can be set; End of cycle, keep relay disconnected;
  • P5: After the signal is triggered, the relay disconnects the CL time, and then the relay conduction the OP time, and then loops the above action, gives the signal again in the loop, relays conduction, stops the timer; and the number of cycles (LOP) can be set; End of cycle, keep relay conduction;
  • P6: No trigger signal after power-on, After the relay conduction OP time, the relay disconnects the CL time, and then loops the above action, the signal is invalid in the loop, the number of cycles (LOP) can be set; End of cycle, keep relay disconnected;
  • P7: No trigger signal after power-on, After the relay disconnects the CL time, the relay conduction OP time, and then loops the above action, the signal is invalid in the loop, the number of cycles (LOP) can be set; End of cycle, keep relay conduction;
  • P8: Signal hold function: The signal is maintained, the timing is cleared, and the relay conduction; when the signal disappears, the relay disconnects after the timing OP; during the timing, there is another signal and the timing is cleared;
  • P9: Signal hold function: The signal is maintained, the timing is cleared, and the relay disconnected; when the signal disappears, the relay conduction after the timing CL; during the timing, there is another signal and the timing is cleared;
  • (P0~P7) mode, short press the pause button, Start timing if the system is not timed; If the system is already timed, the system pauses the timer, the relay disconnected, flashing “out” to indicate a reminder;
  • P8/P9 mode, The pause button as a trigger signal in the Run interface, Short / Long press fail.
 
Specifications:
  • Timing Range: 0.01 sec~9999 min
  • Power Supply: 6V~30V
  • Trigger signal source: High level(3.0V~24.0V), Low level(0.0V ~0.2V), Switch signal
  • Maximum Output load: DC 30V 5A and AC 220V 5A
  • Static Current: 15mA Operating current: 50mA
  • Service life: more than 100,000 times; working temperature: -40-85°C
  • Optocoupler isolation, strong anti-interference ability, industrial grade circuit board, after power
  • set parameters memory forever.
  • Size: 8×3.8×1.9cm/3.15×1.5×0.75inch

  • We offer FREE P&P to UK and charge small fee for other countries. We do not provide pick-up service.
  • We only ship to your eBay registered address.
  • Handling time is 3 business day after payment cleared.
  • Estimated delivery time: UK 15-20 days, EU 18-25 days, Others 15-30 days. Time may be longer due to Customs clearance or peak seasons.

  • We accept Apple Pay, Google Pay, PayPal, Credit Cards on eBay.
  • Credit cards is accepted at eBay checkout.
  • We never responsible for customs duty or VAT.

  • Return (in its new, unused condition) for refund is accepted within 60 days after item delivered. Contact us for RMA number.
  • Confirmed faulty items/ DOA will be replaced or refunded.
  • Accessories, mis-used or man-made damaged items are not under warranty.
  • Please contact us by email if you have problem with your items.

  • We respect every buyer, every purchase, contact us by email if you have questions before or after purchase.
  • Your positive feedback and 5-star rating is appreciated if you are satisfied, it gives us encouragement and helps us do the best to you.

  • We are a team of computer expert, build and solve PC problem same as yours. Specialize in Drive and Storage technology, like SDD and Blu-ray drive.

On 09-May-2024 at 15:46:55 BST, seller added the following information:

DataCaciques