?

Introduction for Palm Patient Monitor

RPM-8000B Palm multi-parameter patient monitor has super high quality and very competitive price.?
All-in-one designed module with 5 standard parameters: ECG, NIBP, SPO2, Pulse Rate and Temperature. ?
Free matched two sets advanced software is for data downloading and tele-monitoring, and has convenient & rapid Bluetooth printer can print datas and ECG waveform.?
This machine can meet all requirements, and meet requirements of hospital & other departments in emergency treatment, first-aid, rescue,etc.?

Function?for Palm Patient Monitor

Touch screen,5.1 inch color TFT LCD, simple for operating, quickly&accurately measure the data;Build-in rechargeable Li-battery, up to 15hours running time, support AC and DC power;
Adjustable audible and visual alarms, and sensor off alarm;
Long time monitoring and sleeping monitoring;
Easy to carry, suitable for ambulance center, has the stand for fixing;
Prior:
Storage and review data up to 9999 user ID and 3888groups via Trend Graph and Trend List.
USB and Bluetooth data upload;
Horizontal and vertical display selectable;
Big font screen interface is easy to observe;
Back light can be adjusted;
Free advanced software
Optional Bluetooth printer to print the waveform and data out.

Specifications

Following is the specifications, which has complete configuration of ECG,TEMP, BP,NIBP and SPO2

General Specifications

Size: 209mm×104mm×47.5mm
Net Weight: 655g
Display Specification
Measurement Display: color TFT- LCD/touch screen
Power Supply Indicator: Dual-color LED (red/green)
Charging indicator: A green LED?

Power Supply

AC Power Adaptor
Input: 100～240VAC, 50/60Hz, 0.7A
Output: DC 5V, 1.5A

Battery

Li-ion rechargeable battery, 3.7V,/7200mAH
Operating Time: 15 hours with full battery capacity.
(Condition: 25℃, NIBP working period is 15 minutes)
Recharge Time: 10 hours.

Environment

Temperature
Working:0℃～45℃
Transport and Storage: -25℃～85℃
Humidity
Working:30% ～85 %
Transport and Storage: 30% ～95 % (no condensation)

Monitoring Parameter

ECG
Input：3- lead ECG cable, standard AAMI cable connector
Lead Selection：I，II，III
Gain Selection：×1，×2，×4，×8
Sweep Speed: 12.5, 25, and 50 mm/s
Frequency Response: None filter: 0.05～100Hz (-3dB), filter: 0.5～40Hz (-3dB)
Calibration Signal: 1mV square wave?
Protection: Against electrosurgical interference and defibrillation
Heart Rate
Measuring Range: 20 bpm～300 bpm
Renew Time: 1 time per beat
Accuracy:?±1 bpm
Alarm Mode: Audible and visual alarm

SpO2?
SpO2%
Measuring Range:0%～100%
Resolution:1 %
Accuracy:±2 %(90%～99%),?±3 %(70%～89%),unspecified (0%～69%)
Pulse Rate?
Measuring and Alarm Range:20～300bpm
Resolution:?1bpm
Accuracy:?±1bpm

NIBP?
Method: Oscillometric
Mode: Manual, Auto, STAT
Measuring Interval in AUTO Mode: 1, 2, 3, 5, 10, 15, 20, 30, 45, 60 (min)
Measuring Period in STAT Mode: 5 min
Cuff Pressure Range:0 mmHg～300mmHg
Pulse Rate Range:30 bpm～250bpm
Measurement Rage: Adult 30 mmHg～255mmHg, Pediatric 30 mmHg～160mmHg
Over-pressure Protection: Adult 300mmHg, Pediatric 220mmHg
Pressure Resolution?: 1mmHg

The SYSTOLIC and DIASTOLIC values measured using this device shall be equal to those measured by trained medical personnel using cuff and stethoscope. The MEAN value measured using this device is equal to that measured using blood pressure measurement device.?

Temperature
Input: Body surface thermal-sensitive resistor temperature sensor
Measuring Range: 0℃～50℃
Accuracy:?±0.1℃

Storage and Review?
Maximum Data Quantity: 3888 groups
Maximum Trend Time: Continuous 129.6 hours

Packing list?
- Color palm patient monitor main unit?1 pc
- 3-lead ECG cable ( include surface TEMP probe)?1pc
- Adult finger SpO2 sensor?1 pc
- Adult NIBP cuff?1 pc
- NIBP extension tube?1 pc
- AC power adaptor?1 pc
- The operator’s manual?1 pc

Selectable Accessory
- Pediatric finger Spo2 sensor?
- Neonatal wrap SpO2 sensor?
- Bluetooth printer?