Rated output:
Power amplifier
Rated output: | Front: |
95 W + 95 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) | |
125 W + 125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) | |
Center: | |
95 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) | |
125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) | |
Surround: | |
95 W + 95 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) | |
125 W + 125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) | |
Surround back: | |
95 W + 95 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) | |
125 W + 125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) | |
Output connectors: | 4 – 16 Ω/ohms |
Analog
Input sensitivity/Input impedance: | 200 mV/47 kΩ/kohms |
Frequency response: | 10 Hz – 100 kHz — +1, –3 dB (Direct mode) |
S/N: | 100 dB (IHF–A weighted, Direct mode) |
Color component video connector
Input level and impedance: | Y signal — 1 Vp-p, 75 Ω/ohms PB / CB signal — 0.7 Vp-p, 75 Ω/ohms PR / CR signal — 0.7 Vp-p, 75 Ω/ohms |
Frequency response: | 5 Hz – 60 MHz — 0, –3 dB |
Tuner section | [FM] | [AM] |
| (Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10 –15 W) | |
Reception frequency range: | 87.5 MHz – 108.0 MHz | 522 kHz – 1611 kHz |
Effective sensitivity: | 1.2 μV (12.8 dBf) | 18 μV |
50 dB sensitivity: | MONO ― 2.8 μV (20.2 dBf) | |
S/N ratio: | MONO ― 70 dB (IHF–A weighted, Direct mode) STEREO ― 67 dB (IHF–A weighted, Direct mode) | |
Distortion: | MONO ― 0.7 % (1 kHz) STEREO ― 1.0 % (1 kHz) |
Network type (wireless LAN standard): | Conforming to IEEE 802.11b |
Security: | WEP 64 bit, WEP 128 bit |
WPA/WPA2-PSK (AES) | |
WPA/WPA2-PSK (TKIP) | |
Radio frequency: | 2.4 GHz |
No. of channels: | 1 – 13 ch |
Communications system: | Bluetooth Version 2.1 + EDR (Enhanced Data Rate) |
Transmission power: | Maximum 2.5 mW (Class 2) |
Maximum communication range: | Approx. 10 m in line of sight∗2 |
Frequency band: | 2.4 GHz band |
Modulation scheme: | FHSS (Frequency-Hopping Spread Spectrum) |
Supported profiles: | A2DP (Advanced Audio Distribution Profile) 1.2 |
AVRCP (Audio Video Remote Control Profile) 1.4 | |
Corresponding codec: | SBC, AAC |
Transmission range (A2DP): | 20 Hz - 20,000 Hz |
Power supply: | AC 230 V, 50/60 Hz |
Power consumption: | 500 W |
Power consumption in standby mode: | 0.1 W |
Power consumption in CEC standby mode: | 0.5 W |
Power consumption in network standby mode: | 2.7 W |