WeMos D1 Mini Micro SD Shield

 

Description:

1.Long female pins x2pcs

2.Short female pins x2pcs

3.Normal pins x2pcs

4.Micro SD Shield x1pcs

Package Include:

1PCS Micro SD Card Shield for WeMos D1 mini TF WiFi ESP8266 Arduino Compatible SD Storage

 

 

WeMos D1 Mini Dual Base Shield

 

Features:

Dual bases for all Wemos D1 Mini modules and shields

Duplicates I/O and power

Warning: all I/O are designed to be 3.3V compliant only.

Package Included:

4 x Short female pins

1 x Dual Base

 

 

WeMos D1 Mini LED WS2812B

 

Description:

1.Long female pins x2

2.Short female pins x2

3.Normal pins x 2

4.WS2812B RGB Shield x 1

Package Included:

1  x  WS2812B RGB SHIELD for WeMos D1 mini

 

 

WeMos D1 Mini ProtoBoard Shield

 

Package Included:

1. 4pcs x Long female pins
2. 4pcs x Short female pins
3. 4pcs x Normal pins
4. 2pcs x ProtoBoard Shield

 

 

WeMos D1 Mini Button Shield

 

Brand Name: WeMos

Model Number: One Button Shield

Install Style: Plug-in

Package Included:

1PCS 1-Button Shield Board For WeMos D1 Mini One Button Switch

 

 

WeMos D1 Mini relay 5V

 

New relay shield for WEMOS D1 mini, it's same size of normal mini shield now!

Shipping list:

1.Normal pins x2pcs

2.5V Relay Shield x1pcs

 

 

WeMos D1 Mini relay 12V

 

Description

 New relay shield for WEMOS D1 mini, it's same size of normal mini shield now!

Shipping list:

1.Normal pins x2pcs

2.12V Relay Shield x1pcs

 

 

WeMos D1 Mini DHT11 Sensor

 

Brand Name: WeMos

Model Number: DHT11 Shield

Install Style: Plug-in

Package included:

1 x DHT11 Module

2 x Pin headers

4 x Female pin headers

 

 

WeMos D1 Mini Triple Shield

 

Product Information

For some shields, it is important that they are operated in parallel. (e.g., display shield and push-button ect.) There is this through-plated board. Many shields available: TF card reader, 1-button shield, relay shield (more to follow) ... Compatible with Arduino

 

 

WeMos D1 Mini DS1307+Micro SD

 

With this Data Log Shield for WiFi D1 Mini board, can saving data to files on any FAT16 or FAT32 formatted MicroSD card. The included RTC (Real Time Clock) can be used to timestamp all your data with the current time, so that you know precisely what happened when!

SD card interface works with FAT16 or FAT32 formatted cards.

Real time clock (RTC) keeps the time going even when the power disconnected. The coin cell battery backup last date and time.

RTC protected from wrong connecting of battery.

Pinout:

RTC:

D1 - SCL

D2 - SDA

CD card:

D5 - CLK

D6 - DO

D7 - DI

D8 - CS

DataLog Shield for WeMos D1 mini, with pin-headers set:

Male Pin Header 1x8pins = 2 pcs

Female Pin Header -BLACK 1x8pins = 2 PCS

Stackable Header - BLACK 1x8pins = 2 PCS

 

 

WeMos D1 Mini LED Matrix Shield

 

Descritption:

8x8 dot matrix LED

8 step adjustable intensity

Package Included:

1PC*WEMOS Matrix LED Shiled

2PCS*Pins

 

 

WeMos D1 Mini Buzzer Shield

 

Description:

100% brand new and high quality.

Specifications:

Frequency: 1kHz-3kHz

4 optional control pins (Default: D5)

Size: 2.8x2.5cm/1.1x0.98inch

Quantity: 1 Pc

Note:

1.Please allow 1-2cm error due to manual measurement. pls make sure you do not mind before you bid.

2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:

1 PCS x Buzzer Shield

 

 

WeMos D1 Mini Shield V1.1.0

 

DC Power Shield V1.1.0 for WEMOS D1 mini

Features:

Input: 7-24V

Max Current: 1A

Package includes:

1.WEMOS DC Power Shiled x1PCS

2. Pins x2PCS
3. Connector x1PCS

 

 

WeMos D1 Mini Battery Shield

 

You can use D1 mini without usb cable, it's really wireless now.

Put D1 mini anywhere, using this battery shield and a lithium Battery.

Boost, just connect lithium Battery to this shield, power supply for the entire D1 mini system.

Charging, when the battery run out, you do not need to unplug the battery, just using usb port to charging.

1. Connect to lithium Battery (normal 3.3-4.2V)
2. Charging port (normal 5V)
3. Green LED, lights when charging is completed
4. Red LED, lights when charging
5. J1: setting max charging current, 0.5A or 1A.

Shipping list:

1.Normal pins x2pcs

2.Battery Shield  x1pcs

 

 

WeMos D1 Mini TB6612FNG

 

I2C interface

Power supply voltage: VM=15V max

Output current: Iout=1.2A(average) / 3.2A (peak)

Standby control to save power

CW/CCW/short brake/stop motor control modes

VM: Motor Power Supply +

GND: Motor Power Supply -

A1: Motor A

A2: Motor a

B2: Motor B

B1: Motor B

S: Stand by control port (In io mode)

1. Stanby control mode

- I2C mode: Control TB6612's STBY with I2C protocol

- IO mode: Control TB6612's STBY with "S" pin

2. Shield reset mode

- short: reset with d1 mini (reset at power on or press d1 mini's reset button)

- open: reset by "DTR" pin.

2. I2C address

AD1

AD0

Address

-

-

0x2D

-

x

0x2E

x

-

0X2F

x

x

0x30

 

 

WeMos D1 Mini SHT30

 

Description:

100% Brand New and High Quality.

Shape: Same as the picture show

1. Type: SHT30 Shield
2. Size: 28.3mm x 26mm
3. I2c interface
4. Typical accuracy2% RH and0.3 ° C
5. FOR D1 MINI

Package included:

1 X SHT30 Shield for WeMos D1 mini SHT30 I2C digital temperature and humidity sensor

 

 

WeMos D1 Mini WIFI Dev Kit

 

This is D1 mini, it is a mini WIFI board based on ESP-8266EX.

11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire

supported(except D0)

1 analog input(3.3V max input)

a Micro USB connection

Compatible with；check here

Compatible with ；check here

How to get started in Arduino:

Setup driver

Before you use miniD1 boards, you need setup CH340g driver.

Python

On Windows you need install Python 2.7.10.

On Linux & MAC OSX, you don't need install it, comes preinstalled with OS.

Installing Hardware package

There is two ways to install hardware package, Boards Manager or GIT

Installing with Boards Manager

Starting with 1.6.4, Arduino allows installation of third-party platform packages using

Boards Manager. We have packages available for Windows, Mac OS, and Linux (32 and

64 bit).

<1>. Install Arduino 1.6.7 from the Arduino website.

<2>. Start Arduino and open Preferences window.

<3>.Enter http://arduino.esp8266.com/stable/package_esp8266com_index.json

into Additional Boards Manager URLs field. You can add multiple URLs, separating them

with commas.

<4>. Open Tools→Board:xxx→Boards Manager and install esp8266 by ESP8266

Community (and don't forget to select your ESP8266 board from Tools > Board menu

after installation).

Installing with GIT (Recommend):

We recommend using GIT to install Hardware package,

you can always get the latest version of it.