Description:
Handwashing is imperative during cooking, if our hands are coated in grease or if ve been handling meat or poultry, the touchless soap dispenser can provide soap conveniently without contaminating your hand. The automatic soap dispenser with a infrared provides you a sanitary, no- and easy-to-use experience.
Features:
[Infrared ]Hand-free soap dispenser comes with built-in accurate infrared , and just 0.5 seconds sensing to make out.
[Adjustable Soap Quantity]1mL pumps out each , if you need more please stay your hands and wait another 2 seconds later, it will pump out again.
[-leakage]The rubber material on the soap dispenser bottom will soap leakage, and keep dispenser not be sliding around your countertop.
[IPX6 Waterproof]Touchless soap dispenser with IP67 rating deep waterproof technology to the soap or to corrode circuit board.
[Visible Window]A visible window acts as a reminder to remaining and get in to refill the soap.
Specifications:
Color: Brown; Dark Brown; (This has no stripes, the picture is reflective); Blue (Optional)
Material: ABS
Style: Modern
Use mode: Infrared Induction
Induction distance: 2-3inch
Capacity: 300mL
Waterproof: IPX6
: 3-40℃
Working Voltage:
: 4*AAA (Not Included)
: Kitchen, Bathroom, Hotel, , Hospital, etc
Product Size: 7.2*14.2*22cm / 2.83*5.59*8.66inch
Package Size: 14.5*7.5*22.3cm / 5.7*2.95*8.77inch
Package Weight: 333g / 0.73lb
Package List: H27931S
1 * Automatic Soap Dispenser
1 * User Guide
Cautions：
1. Please follow the instructions or the product itself to properly install the with sufficient , otherwise, the soap dispenser will not work.
2. Please make sure the cover is well mounted. Otherwise, the will come out.
3. Do not use soap that is too viscous, otherwise, it will not be smooth or cannot be discharged; too thick soap can be diluted by adding an appropriate amount of before use.
4. When using for the first , you can use the test to remove the internal .
5. For the first you use, please try a few times first. Then the will fill the hose and come out.
6. When the is flashing, it means the low. Please change the .
7. When it is not used for a long , please check whether the internal soap has deteriorated. The deteriorated soap may cause the to be blocked and the cannot be discharged.
8. Please do NOT shake the devices to any serious damage.
9. The product will be tested before leaving the factory. It is normal when you receive the product with drops.
Handwashing is imperative during cooking, if our hands are coated in grease or if ve been handling meat or poultry, the touchless soap dispenser can provide soap conveniently without contaminating your hand. The automatic soap dispenser with a infrared provides you a sanitary, no- and easy-to-use experience.
Features:
[Infrared ]Hand-free soap dispenser comes with built-in accurate infrared , and just 0.5 seconds sensing to make out.
[Adjustable Soap Quantity]1mL pumps out each , if you need more please stay your hands and wait another 2 seconds later, it will pump out again.
[-leakage]The rubber material on the soap dispenser bottom will soap leakage, and keep dispenser not be sliding around your countertop.
[IPX6 Waterproof]Touchless soap dispenser with IP67 rating deep waterproof technology to the soap or to corrode circuit board.
[Visible Window]A visible window acts as a reminder to remaining and get in to refill the soap.
Specifications:
Color: Brown; Dark Brown; (This has no stripes, the picture is reflective); Blue (Optional)
Material: ABS
Style: Modern
Use mode: Infrared Induction
Induction distance: 2-3inch
Capacity: 300mL
Waterproof: IPX6
: 3-40℃
Working Voltage:
: 4*AAA (Not Included)
: Kitchen, Bathroom, Hotel, , Hospital, etc
Product Size: 7.2*14.2*22cm / 2.83*5.59*8.66inch
Package Size: 14.5*7.5*22.3cm / 5.7*2.95*8.77inch
Package Weight: 333g / 0.73lb
Package List: H27931S
1 * Automatic Soap Dispenser
1 * User Guide
Cautions：
1. Please follow the instructions or the product itself to properly install the with sufficient , otherwise, the soap dispenser will not work.
2. Please make sure the cover is well mounted. Otherwise, the will come out.
3. Do not use soap that is too viscous, otherwise, it will not be smooth or cannot be discharged; too thick soap can be diluted by adding an appropriate amount of before use.
4. When using for the first , you can use the test to remove the internal .
5. For the first you use, please try a few times first. Then the will fill the hose and come out.
6. When the is flashing, it means the low. Please change the .
7. When it is not used for a long , please check whether the internal soap has deteriorated. The deteriorated soap may cause the to be blocked and the cannot be discharged.
8. Please do NOT shake the devices to any serious damage.
9. The product will be tested before leaving the factory. It is normal when you receive the product with drops.