Digital Clamp Meter Multimeter AC DC NCV True RMS Multi‑Function Clamp Meter
Feature:
1. Support True RMS , NCV function, duty cycle, relative value measurement, data retention .
2. The multimeter supports CE standard design, and improving the safety of test.
3. Multi‑Function clamp meter with full function and strong anti‑interference.
4. The clamp meter is multi‑functional and can measure AC/DC voltage, AC/DC current, resistance, frequency rate etc.
5. ABS material, easy to use, with clamp light display and back light display, and convenient to read data.
Specification:
Item Type: Clamp Meter
Model: CM-2016
Material: ABS
Power supply: 2 x 1.5V AAA (Battery Not Included)
Purpose: Electricity test
| Basic Function | Range | Basic Accuracy |
| DC Voltage | 600mV/6V/60V/600V | ±(0.5%+5) |
| AC Voltage | 6V/60V/600V | ±(0.8%+5) |
| DC Current | 60A/600A/800A | ±(1.5%+5) |
| AC Current | 60A/600A/800A | ±(1.5%+5) |
| Electric Resistance | 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ | ±(0.8%+1) |
| Electric Capacity | 6nF/60nF/600nF/6uF/60uF/600uF/6mF/60mF | ±(2.5%+5) |
| Frequency Rate | 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz | ±(0.5%+4) |
| Temperature | -40℃~1000℃ /0℉~1832℉ | ±(1.0%+5) |
| Special Function | CM-2016 | |
| NCV | √ | |
| True RMS Measurement | √ | |
| Diode Test | √ | |
| On-Off Alarm | Lower than 50Ω, when higher than 600Ω, OL will be displayed | |
| Low Voltage Display | Approximately less than 2.4 V | |
| Data Retention | √ | |
| Automatic Shut-Down | About 15 minutes | |
| Duty Cycle Measurement | √ | |
| Functional | √ | |
| Clamp Head Lighting/Backlight Function | √ | |
| Input Resistance | 10MΩ | |
| Sampling Frequency | 3 times/sec | |
| AC Frequency Response | Current (40-1000) Hz/Voltage (40-2000) Hz | |
| Operation Method | Manual or automatic range | |
| Maximum Display | 6000 | |
| Open Jaws | 28mm | |
| Power Supply | 2 x 1.5V AAA (Battery Not Included) | |
| Power Consumption | Quiescent current about 2mA | |
Package List:
1 x Clamp Meter (Battery Not Included)
2 x Test Lead
1 x Thermal Contact
1 x Tool Bag
1 x Clamp Meter (Battery Not Included)
2 x Test Lead
1 x Thermal Contact
1 x Tool Bag
NOTE:
1.Your valid phone number is very necessary for the shipping, otherwise we can't guarantee that the package would safely arrives.
2. Any Customs tax applied to this package should be covered by buyers.
3.As has been stated on the eBay item description, Import duties, taxes and charges are not included in the item price and shipping charges.These charges be at the buyer responsibility. meanwhile the customs tax depend on the buyer local customs office.
1.Your valid phone number is very necessary for the shipping, otherwise we can't guarantee that the package would safely arrives.
2. Any Customs tax applied to this package should be covered by buyers.
3.As has been stated on the eBay item description, Import duties, taxes and charges are not included in the item price and shipping charges.These charges be at the buyer responsibility. meanwhile the customs tax depend on the buyer local customs office.
