Functions:
1. Brakes: without/with brakes, factory default is without brakes. Brakes can be switched on or off by means of a jumper cap.
2. Battery type: Compatible with Li-xx (Lithium) / Ni-xx (NiCd or NiMH) batteries, default is Li-xx (Lithium). The battery type can be selected via the jumper cap.
3. Low voltage protection threshold: The low voltage protection threshold for Li-ion battery cells is 3V, so for 2S Li-ion battery packs, the low voltage protection threshold is 6V; for 3S Li-ion battery packs, the low voltage protection threshold is 9V; for Ni-Cd/Ni-MH battery packs, the protection voltage is 4V.
4. Low voltage protection mode: When entering the low voltage protection mode of the battery, the ESC will gradually reduce the output power.
5. Over temperature protection: When the working temperature of the ESC exceeds 110 degrees, the ESC will reduce the output power for protection. After the temperature drops, the ESC will gradually restore the maximum power.
6. Throttle signal loss protection: When the loss of the throttle remote signal is detected for 2 seconds, the ESC will start to reduce the output power, and if the signal can never be recovered, it will be reduced to zero output (the maximum time of the power reduction process is 2 seconds). If the [throttle] remote signal is restored during the power reduction process, the [throttle] control will be restored immediately.
Features:
1. Intelligent control by microcontroller.
2. Compatible with lithium and NiCd/NiMH batteries.
3. Multiple protection functions such as abnormal input voltage protection/battery low voltage protection/overheating protection/throttle signal loss protection.
4. Braking function can be activated or deactivated.
Brushed 20A:
1. Output capacity: 20A continuous current, 25A short-time current (not less than 10 seconds).
2. Power input: 2-3 lithium batteries or 4-10 NiMH/NiCd batteries.
3. BEC output: 1A/5V (linear mode).
4.PWM frequency: 2KHz.
Brushed 30A:
1. Output capacity: 30A continuous current, 40A short-time current (not less than 10 seconds).
2. Power input: 2-3 lithium batteries or 4-10 NiMH/NiCd batteries.
3. BEC output: 1A/5V (linear regulator mode).
4.PWM frequency: 2KHz.
20A Specifications:
Number of battery sections: 2-3S
Continuous current: 20A
Peak current: 25A
UBEC output: 5V-1A
Output plug: No plug
Power plug: No plug
Product size: 42*21*8mm
Product weight: 17G
Brushed/Brushless:Brushed
Applicable type: Brushed water pump
30A Specifications:
Number of battery sections: 2-3S
Continuous current: 30A
Peak current: 40A
UBEC output: 5V-1A
Output plug: No plug
Power plug: No plug
Product size: 42*21* 8mm
Product weight: 21G
Brushed/Brushless:Brushed
Type of application: brushed water pump
Package Includes:
1 * Brushed ESC