Product information?

Transmission medium Bluetooth 2.1

Carrier Frequency 2.402-2.480GHz

Protocol Bluetooth BT2.1+EDR

LED 8 LEDs with multiple colorful lights

Pairing After the handle enters the pairing mode, if the pairing is not successful within 2.5 minutes, it will automatically sleep

Battery left and right a polymer lithium battery 3.7V/500mAH

Battery life: 6.5 hours of continuous work once fully charged

Working voltage 3.7V-4.2V

Charging voltage 5V

Temperature cycle and high and low temperature working requirements -10?~50?

Required storage temperature -20?~70?

Drop test height 1.2m 6 sides 2 cycles Marble floor

Key force Silicone key force is 160g, light touch switch force is 160g

Key life (ABXY, arrow keys, L2, R2 keys) silicone keys 500,000 times. L, R, Home, Camera, +, ?, T keys 100,000 times

5.3.1 Wireless Mode

In the off state: long press the following key combination to enter pairing mode

Switch mode: long press the pairing button for 2 seconds, the LED1-LED4 marquee flashes quickly. The channel light is always on when the connection is successful

5.3.2 Turbo and AUTO TURBO functions

1. In any mode

Press the TURBO key + A/B/X/Y/L1/L2/R1/R2 cross key to set the TURBO function

(For the first time) Press the TURBO key + A key to realize the manual TURBO function (press and hold the burst)

(Second time) Press the TURBO key + A key to realize the automatic TURBO function (automatic burst)

(Third time) Press the TURBO key + A key to clear the TURBO function (clear)

Note: Press and hold the individual TURBO button for 5 seconds (vibration prompt) to clear the manual TURBO/automatic TURBO function

2. TURBO speed adjustment (there are three speeds adjustable)

Left handle adjustment method: press the TURBO button and "-" button, press the speed to increase one gear, three gears can be adjusted, and cycle in turn

Right handle adjustment method: Press the TURBO button and add the "+" button, press the speed to increase one gear, three gears can be adjusted, and cycle in turn

3. Motor vibration adjustment function

Press and hold the vibration button on the back to adjust the vibration intensity of the motor (the left and right handles can be used as separate handles to adjust the vibration, and the vibration intensity can be cycled in turn). There are five intensities in total, 100%, 75%, 50%, 25%, and 0%.

4. Controller hardware reset

Press and hold the HOME button for more than 10 seconds to reset the handle hardware.

5. Reconnect the handle

When the handle is matched with the previous device, you only need to press the HOME button after the handle is in standby to connect back to the previous device.

5.3.3 Charging

Shut down and charge, led 4 lights flash slowly, fully charged and off

5.3.4 Play mode while charging

switch: The corresponding channel light flashes slowly and is always on when fully charged.

5.3.5 Lighting Control Instructions

1. T+R3/L3: Monochrome light constant mode, overall light color change: press to change a color, sequence: red/yellow/blue/green/purple/orange/white/magic color, cycle change.

2. T+ (double click) R3/L3: breathing mode

The first time: RGB seven-color breathing;

The second time: LED Symphony breathing;

Third time: Turn off the lights.

3. Light brightness adjustment:

T+ rocker up button can increase the brightness of the handle light;

T + rocker down button can reduce the brightness of the handle light.

Back key macro and mapping function:

Macro programming can be programmed: 2 joysticks, L3, R3, cross keys, ABXY, L, R, ZL, ZR, "+" key, "-" key.

Press and hold the setting button M to enter macro programming (4 indicator lights are always on), then press the buttons you want to set (you can press one or more, you can press them simultaneously or in sequence), and press the buttons you want to set After that, release the setting key to indicate that the setting is complete (there will be a vibration prompt). The programming key will store the operation just now, and the next time you press the programming key, the stored operation can be triggered, which can be used to set combos in the game.

For example: press and hold the right M button (4 LEDs are on at the same time, do not let go of the M button you hold down) + B button, then press the A button every second, and then press the X button every two seconds, release M after the setting is completed key to save and exit (vibration prompt), the function of pressing the MR key at this time is to copy the key pressed just now: B interval 1 second A interval 2 seconds X.

Note: 1. The left M key only sets the programmable key of the left handle;

The right M key only sets the programmable keys of the right joystick.

2. Shut down and restart the handle to clear the macro programming of the settings

The nintendo switch controller has a 500 mah high-density lithium battery inside, about 6.5 hours of playtime with 3 hours of charging time.

The delicate touch and diamond laser anti-slip texture allow you to control the keys more quickly.

Ergonomic handle design, comfortable grip, easier to play for a long time.

Environmentally friendly material, safe and assured.