Batteriekapazität Tester Elektronisch Last Batterie Tester m/2*Testkabe
Beschreibung:
Lademodus: Niedrige CC-, CV-, CW-, CR-Grundlastmodi, niedriger Eingangs- oder Rückwärtsverbindungsschutz und Alarm mit Online-Synchronbetrieb mit mehreren Lasten
Hohe Präzision und hohe Stabilität: Optimierte Wärmeableitungsstruktur, hohe Leistungsdichte und digitaler Steuermodus, höhere Präzision, gute Stabilität, RS485, 232-Kommunikationsschnittstelle, MODBUS-Protokoll.
Schutzfunktion: Mit Überspannung, Überstrom, Stromversorgung, Übertemperaturschutzfunktion, Niederspannungs-Fernmessfunktion;
Automatische Testfunktion: mit externem E / A-Triggersignal, PASS, FAIL-Befehl, leistungsstarker, schnittstellenfreundlicher PC-Software-Unterstützung.
Multitestfunktion: niedrige dynamische Testfunktion von 10 kHz; Testfunktion für niedrige Batteriekapazität; Funktion zum Testen des Innenwiderstands bei niedriger Batterie; niedrige Überstromschutzpunkt- / Zeittestfunktion; PWM-Steuerung mit niedrigem Lüfter, Netzteil Netzteil 110VAC / 220VAC Schaltverwendung.
Eigenschaften:
Modell: KP184
Netzstecker: EU-Stecker
Leistungsaufnahme:
Spannung: AC 110 V / 220 V ± 10%, 50 ± 2 Hz
Leistungsaufnahme: <20 W.
Eingang laden:
Lastspannung: DC 1 -150 V.
Laststrom: 0-40A
Lastleistung: 0-400W
Meßgenauigkeit:
Strom: ± 0,05% + 5 mA
Spannung: ± 0,05% + 5 mV
Steuergenauigkeit:
Strom: ± 0,05% + 5 mA
Spannung: ± 0,05% + 5 mV
Kommunikationsmethode: RS232 / RS485
Schutz:
Überspannung (OV): mehr als 152 V im Leerlauf
Übertemperatur (OT): 85 ° C.
Überstrom (OP): Einkanal 410W
Leistungssicherung: 0,5A
Umgebungstemperaturbereich
0 ~ 500C
Umgebungsfeuchtigkeitsbereich: 10 ~ 90% rF
DC-Eingangsklemme zum Gehäuse hält einer Spannung von ± 500 VDC stand
Gleichstromeingang zum Isolationswiderstand des Gehäuses:> 20 MΩ, 500 VDC
AC-Eingang zum Isolationswiderstand des Gehäuses:> 20 MΩ, 500 VDC
Abmessungen (mm) L × B × H: ungefähr 300 × 90 × 190
Packungsgröße: 38,5 * 16 * 27 cm
Gewicht: 4,5 kg
Das Paket beinhaltet:
1 x elektronische Gleichstromlast KP184
1 x Stecker
1 x Fernkompensationsterminal
2 x positiver und negativer Testanschlus
2 x Testkabel
1 x Bedienungsanleitung
HINWEIS: Dies ist ein zurückgegebener Artikel, der Kunde sagte, dass das Display bei der Auswahl des Konstantstroms (CC) nicht das Symbol CC anzeigt, das Symbol W für Watt ist schwer zu erkennen.
Wenn es Ihnen nichts ausmacht, können Sie es gerne bestellen.
=========================
NOTE:This is a Returned item, the cusotmer said that the display does not show the symbol CC when selecting the constant current (CC), the symbol W for Watt is difficult to recognize.
If you do not mind, welcome to order it.
Description:
Load mode: Low CC, CV, CW, CR four basic load modes, low input or reverse connection protection and alarm, with multiple load online synchronous operation
High precision and high stability: Optimized heat dissipation structure, high power density and digital control mode, higher precision, good stability, RS485, 232 communication interface, MODBUS protocol.
Protection function: With over voltage, over current, power supply, over temperature protection function, low voltage remote measurement function;
Automatic test function: with external I / O trigger signal, PASS, FAIL command, powerful interface friendly PC software support.
Multi-test function: low 10 KHZ dynamic test function; low battery capacity test function; low battery internal resistance test function; low overcurrent protection point/time test function; low fan PWM control, power switch power supply 110VAC/220VAC switching use.
Features:
Model: KP184
Power plug:EU plug
Power input:
Voltage: AC 110V/220V±10%, 50±2Hz
Power consumption: < 20 W
Load input:
Load voltage: DC 1 -150 V
Load current: 0-40A
Load power: 0-400W
measurement accuracy:
Current: ±0.05%+5mA
Voltage: ±0.05%+5mV
control precision:
Current: ±0.05%+5mA
Voltage: ±0.05%+5mV
Communication method: RS232/RS485
protection:
Overvoltage (OV): greater than 152 V off load
Over temperature (OT): 85 ° C
Over power (OP): single channel 410W
Power input fuse: 0.5A
Ambient temperature range
0~500C
Ambient humidity range: 10~90% RH
DC input terminal to chassis withstand voltage: ±500VDC
DC input to chassis insulation resistance: >20MΩ, 500VDC
AC input to chassis insulation resistance: >20MΩ, 500VDC
Dimensions (mm) L × B × H: about 300 × 90 × 190
Packing size: 38.5*16*27cm
Weight: 4.5kg
The package includes:
1 x KP184 DC Electronic Load
1 x plug
1 x remote compensation terminal
2 x positive and negative test terminal
2 x test cable
1 x user manual