Product Parameters:
Product Power: 500w
Diameter of Heating Zone: 10cm (3.94inch)
Product Size: 13x13x7.8cm (5.12*5.12*3.07inch)
Product Weight:0.7kg
Gear Position: 6 Gears
Product Voltage: 220v 50hz
Material: Stainless Steel/Heat-resistant Plastic
Product Features:
1. Cast Iron Heating Plate
Heat-resistant Casting Hot Plate, Heating Zone Diameter 100mm
2. Four-ear Anti-scalding Handle
Humanized Design, Convenient to Move the Electric Furnace During Heating
3.6 Gear Adjustment
Adjust As Many Gears As You Want, Easy to Use
The Temperature of the Electric Furnace Is 60-100 Degrees Celsius, the Second Temperature Is 100-180 Degrees, the Third Temperature Is 180-260 Degrees, the Fourth Temperature Is 260-340 Degrees, and the Fifth/Sixth Temperature Is 340-420 Degrees. This Temperature Depends on the Amount of Water. the Heating Device Is Different, and the Contact Area with the Heating Plate Is Different, It Will Be Changed, and the Actual Use Shall Prevail.
Special Reminder:
Buyers Must Read Carefully
1. There Will Be a Small Amount of Smoke and Unpleasant Smell When Heated for the First Time
This Is Because the Heating Plate Is a Cast Iron Plate, and a Layer of Anti-rust Protective Film Needs to Be Added During the Production Process. the Protective Film Will Evaporate When Used for the First Time, so Smoke and Odor Will Be Generated. After Evaporation, There Will Be No More Flavor and Smoke. Ns. the First Time You Use It, Let It Ventilate and Burn It for 10-20 Minutes to Evaporate the Protective Film.
2. About in Use
The Reason Why the Power Light Goes out: the Electric Furnace Has a Temperature Control Switch, so the Power Light Will Go out During Use, and the Light Will Go into Constant
In the Temperature State, the Temperature Is Lower than the Gear Temperature Set by the 1-5 Gears, and the Power Light Will Re-illuminate to Maintain the Temperature of the Furnace Surface. the Constant Temperature Furnace Uses This Working Principle. Therefore, When the Buyer Is Using It, They Will Often See the Power Light on and off, and They Will Always Keep a Constant Temperature.
3. During the Heating Process of the Electric Furnace
The Furnace Body Is Also Hot, Please First Understand the Heating Principle of the Electric Furnace, the Working Principle of the Electric Furnace Is the Heating Tube and the Induction Cooker
Different with Magnetic Heating, Electric Heating Furnace Is Radiating Heat. Even If There Is Nothing on the Surface of the Electric Furnace, It Will Not Affect the Operation of the Electric Furnace in Any Way. It Is like a Furnace. When the Fire Is Heated, There Will Be Heat Around, so the Electric Furnace Can Heat Glass Containers. , so Please Do Not Touch the Furnace Body with Your Hands During Use.
There Are some Small Pits and Holes in the Heating Plate That Cannot Be Avoided During the Production Process. During Transportation and Packaging, the Shell and Heating Plate Are Slightly Painted, Which Will Not Affect the Normal Use.
Packing List:
Multi-function Electric Furnace*1