Australia Stock
- Size ：1.8m x 25mm
- Package：2
- Lashing Capacity (LC)：340KG
- Breaking Strength：680KG
- End Fitting (Hook Type) ：Rubber Coated S-Hook
- Colour ：Black
- Strap Material ：Polyester (PES) Webbing, UV Resistant
- Operating Temperature：- 40°C to 100°C
- Australian Standard ：Conforms to AS/NZ 4380
✅ NO TANGLES, NO MESS
Our retractable ratchet straps automatically unspool without tangling or twisting and roll back up effortlessly. CHARGED UP auto-retract straps stay ready for hauling and loading.
✅ HUGE TIME-SAVER
Auto-retract ratchet straps with convenient S-hooks gets any job done in a snap. Tying down a load on the roof rack? No help? No problem! Extend, latch, tighten, and release with ease.
✅ NOTHING COMES LOOSE.
Our tie-downs secure your load with sturdy hooks so things stay in place. Enjoy the ride even with bumps on the road.
✅ MIGHTY CAPACITY
You can tie down almost anything & take it anywhere you need to go.
✅ SAFE & SECURE
Our ratchet straps are proven safer than manual tie-downs for long trips. Whether you need to take a kayak to a lake or move boxes to storage, you can set it up in minutes with no sweat!
Ratchet Tie Downs Don't Let Go!
- Ratchet Tie Down Ratchet Systems are a must have addition to owning any trailer, ute or transporting vehicle. Designed with large lashing capacities, they are perfect for travel and securing heavy duty cargo.
- Webbing tie downs are now widely used in the transport industry. Webbing Tie Downs are light-weight, easy to handle and easy to use. Webbing lashings are more elastic than chains therefore they retain more tension & cause less damage to cargo or paintwork.
Features
- Smart Retractable Ratchet Tie Down System
- Retractable straps have a convenient ratcheting mechanism and easy-to-use hooks on each end; Bolt-On Design: Allows you to mount the straps directly to your trailer, truck bed, or ute tray. The strap will automatically retract back into the in built storage case the tie down mechanism, no more annoying lose ends to tie up!
- Rubber Handle Ratchet Mechanism & Hooks
- The ratchet mechanism handles & S-Hooks on these Ratchet Tie-Downs have a durable rubber coating. This makes using the ratchet mechanism super easy on the hand whilst providing a ergonomic grip. The rubber coating also increases the grip strength of the S-Hooks whilst preventing scratching.
- Features a red button locking mechanism that allows you to easily pull through as much strap length as you require.
- Ratchet Tie Downs are designed, manufactured, & tested to Conform to AS/NZ 4380 Australian Standard.
How to use Retractable Tie Down's
- Press and hold the release button in and lower the handle down as far as it goes.
- The strap can now be pulled out around the load and the fittings connected to solid anchor points.
- Pull the release button and place the handle in the upright position.
- Let go of the release button and tighten the strap by ratcheting the handle.
- A minimum of 2 full wraps around the strap reel is recommended for safety to secure the load and so the tie down can function correctly.
- To lock, leave the handle in the lock position
- To release, simply push the release button again and push the handle completely closed.
Safety Information
WARNING: DO NOT EXCEED LASHING CAPACITY
Key Information
- Selection & Use: Consideration should be given to the required lashing capacity (LC), taking into account the mode of use & nature of the load to be secured. The lashings should be suitably pre-tensioned and regularly checked during the journey.
- Material: This strap is made from Polyester (PES) and is NOT resistant to chemical attack. Effects of chemicals may increase with rising temperature casing the restraint to fail. If there is any contact / contamination from chemical products, a web lashing should be removed from service and disposed of.
- Operating Temperatures: The webbing restraint system complying with the standard is suitable for use in the following temperature range; (minus) - 40°C to 100°C. These ranges may vary in a chemical environment. Changes in environment temperature during transport may affect the force in the webbing. The tension force should be checked after entering warm areas.
- Protection & Limit of Twist: The webbing restraint system should be protected against friction, abrasion and damage from loads with edge radius less than twice the webbing material thickness, using protective sleeves or corner protectors. Webbing restraint should not be used when knotted,
- Storage & Maintenance: If the webbing strap becomes saturated in use, dry in a shaded area prior to storing. It is advisable to lubricate the ratchet mechanism with a small mount of lubricant. When not in use, store in a dry location.