Product Description

Instructions for the use of the gold plating machine and notes.
A: Platinum plating method

Positive (+): Clip titanium mesh Negative (-): Clip jewellery

Voltage: 3-4 volts Temperature: 30-40°C

Shaking is required at the beginning of the plating process Gold plating time: 90-120 seconds

Above 3-5 pieces of rings count plating 

B: Gold plating method 14K.18K.24K           

Temperature: 70.C-80.C

Plating items need to be shaken           

Plating time required: 20-50 seconds

Above: for 1 piece to 4 pieces of rings

Accessories needed for plating: beaker, titanium mesh, plating machine, water line, electric furnace, probe thermometer

C: Silver plating method

Positive electrode: clamping titanium mesh Negative electrode: clamping jewellery

1: Clean first according to electrolytic cleaning salt procedure

2: After electrolysis to be cleaned through 3 beakers

3: 2.5g silver salt 54% 500cc distilled water

Temperature: 40.c Voltage: 5V Plating time: 3-5 seconds

Shake the jewellery back and forth while plating

Note: All silver salts, electrolytic cleaning salts, over beaker cleaning, must be in pure distilled water.

Additional information.

1: First polish brightly with cloth wheel and polisher.

2: Then clean with ultrasonic cleaning machine with de-waxing water (heating)

3: Then polish with a polishing machine

4: Then clean with a steam cleaner

5：Finally finish with electrolysis and electroplating procedure

D：Luminous agent use method

1：1：1Zun luminous agent with 1000ml distilled water  

2: Temperature 50.c-60.c

3:Voltage 6-7V                 

4:Electrolysis takes 5 seconds

5:Positive (+) clip jewellery Negative (-) titanium mesh

Features.
       This product is a more advanced electroplating surface treatment power supply at home and abroad, the power supply has high efficiency, automatic voltage stabilization, current stabilization, over-voltage, over-current protection function and under-voltage, phase loss protection function of silicon controlled rectifier, small volume and light weight.
Uses.
       It has obvious effect on various plating types (copper, nickel, chromium, gold, silver, electrophoresis, etc.), with uniform film, especially for workpieces with irregular performance (less plating time), which is the ideal power supply for surface treatment today.