LASER TREE K40 is a true 40W+ output laser engraving and cutting module designed for
powerful cutting. It uses beam compression technology to combine 8*5.5W
laser diodes into a single powerful laser beam with 40W+ laser power.
Its power can give you a completely different cutting experience. In
order to improve the compatibility with different laser engraver
machines, K40 provides a solution by an adapter board for electric
compatibility and a sliding plate with multi holes for installation
compatibility. Electric compatibility can be checked easily by 'power'
and 'signal' LED indicators.
Focusing is more convenient, and the dual fan cooling is excellent.
These features give the K40 reliable and stable performance and higher
service life.
Features:
(1) K40
Built-in 8*5.5W fast-axis compression diodes, which can
provide up to 40W-46W optical power to achieve fast and efficient cutting.
(2) Electric compatibility can be checked easily by 'power' and 'signal' LED indicators.
(3) Focusing is more convenient, and the dual fan cooling is excellent.
(4) The
bottom is equipped with a red cross positioning cursor (offset X: 0mm,
Y: -21mm), which can quickly locate the starting point and ensure the
accuracy of the secondary cutting operatio
(5) Detachable protective cover, removable and removable, meeting both needs at once.
(6) Integrated
dovetail guide design ensures smooth movement and stability of the
equipment. The guide rail is 115mm long, allowing a wide range of height
adjustment to adjust the focus position, improving the user experience.
(7) Adopt
a large dual-fan design to maximize the air volume and maintain the
best cooling effect while reducing noise, thereby achieving stable
cutting and engraving performance.
(8) Built-in
thermistor, real-time monitoring of tube core temperature ensures
long-term safe and stable operation of the laser module
Cutting ability:
55mm/min 1pass cutting 30mm Pinewood
200mm/min 1pass cutting 15mm Plywood
150mm/min 1pass cutting 9mm MDF
15mm/min 1pass cutting 30mm Acrylic
Product parameters :
Optical Power
|
40W-46W
|
Input
|
24V 6A
|
Wavelength
|
450nm(±10nm)
|
Focal length
|
40mm
|
Power adjustable
|
TTL/PWM
|
PWM modulation
|
0/3-12V,0-5kHz
|
Air Assistance
|
Built-in airway
|
Fan speed
|
9000rpm
|
Operating temperature
|
0-60℃
|
Interface
|
2EDG-3.81
|
Material
|
Aluminum & Copper
|
Weight
|
900g
|
Application
|
Engraving and Cutting
|
Package List:
1* Laser module
1* Drive adapter & 30cm input cable
1* Sliding Plate
1* Spare Protective Lens
1* 24V 8A Power Adapter
1* Power cable
1* Air tube
1* 60cm adapter cable
1* 2.5mm flat screwdriver
1* 2mm L-wrench
LT-AP-220V:
Description:
The air pump is an essential part of the laser module with air assisted.
It provides a steady high-pressure airflow to blow away smoke and obtain clean-cut edges;
Protecting the laser head's lens from contamination and extending the laser head's service life.
In addition, it can improve the efficiency of laser processing and thus save your time.
Features:
1. High-quality materials: metal nozzle, resisting high temperature.
2. Large and steady air output: Adjustable airflow of 0-30L/min, blowing away smoke and residue produced during laser processing, cut deeper、faster and cleaner.
3.
Low Noise & Low Vibration: Anti-slip& damping feet keep
the body stable and reduce the vibration noise effectively.
4. Rapid Heat Dissipation: Aluminum alloy shell, strong heat dissipation, long lasting and more durable.
5.Wide
Compatibility: With two sizes of nozzles (PC6-M8 & PC8-M8)and
hoses( φ8x6mm & φ6x4mm), compatible with most of the laser
module‘s nozzle interfaces on the market. If it is a special size module
air inlet nozzle just need to replace the appropriate air tube and air
outlet nozzle.
Specification:
Voltage: 220V
Power: 16W
Exhaust Pressure: 0.03Mpa
Exhaust Volume: 30L/min
Outlet diameter: 8mm
Item Weight: 1.6kg
Item Size: 14.5*13*8cm
Tip:
Cutting Material Types:
all kinds of wood (including walnut, cherry wood and other high-density
wood), MDF, black acrylic board, cardboard, bamboo chips, leather, some
plastic boards, fiberglass board.
Engraving Material Types:
all kinds of wood (including walnut, cherry wood and other high-density
wood), MDF, bamboo, cardboard, plastic, leather, fiberglass board,
aluminum oxide, stainless steel(non-specular surface), ceramics, dark
stone.
Additional Notes:
1. Materials that are not easily oxidized/decomposed/melted at high temperatures cannot be engraved/cut;
2. All transparent materials cannot be engraved/cut, and
white/blue/purple materials cannot be directly carved/cut except for
materials such as wood, cloth, paper, and leather;
3. Unoxidized aluminum, silver color alumina, copper, silver and gold cannot be engraved;
4. The electroplating material needs to determine the coating composition first;
5. All metals cannot be cut.