Match details for playoff final 2024 in white for Southampton shirts

Fits all adult shirts size approx 12cm wide

Type : dtf

APPLICATION USING A HEAT-PRESS IS HIGHLY RECOMMENDED.

ALL NAMESETS ARE DESIGNED BY US AND PRINTED TO ORDER BY US

APPLICATION GUIDELINES

We STRONGLY recommend that all shirt prints are applied by heat press (this service is available from most t-shirt printing stores).

A household iron can be used but you do so at your own risk. There Are many videos on YouTube to follow.

DO NOT heat longer than advised otherwise this can cause the shirt colour to run through to the nameset.

We cannot accept any responsibility for damage that may arise due to incorrect application.

With new shirts we recommend that it is washed and dried thoroughly before applying a nameset.

We recommend that you do not wash your shirt for at least 24-48 hours after applying the nameset. Always wash the shirt inside-out and on a low temperature (30C). Air dry only.

Outer layer to be applied first following the guidelines below. Allow to cool completely. Then repeat the process for the inner layer.

* Make sure the heat press is clean before applying the nameset.

* Pre-press your shirt between 3-5 seconds at 110/140C to remove any creases or moisture.

* Position the letters and numbers carefully onto the football shirt in the correct position.

* Cover the nameset with a Teflon sheet, silicon sheet or equivalent.

* Apply the heat at 110/140C for 10 seconds at medium/firm pressure.

* Allow print to cool slightly and slowly peel off the plastic cover.

* If the name and/or number do not fully stick, stop peeling, recover and repeat the application process for a further 5 seconds.

ANY PROBLEMS PLEASE CONTACT ME BEFORE LEAVING ANY FEEDBACK.

Thank you for your custom.

Any Name and Number build your own namesets (choose your own) can only be a maximum of one name and 2 numbers per price. You cannot order two smaller names and numbers. If this happens you will be refunded.