Complete 12 Volt
Lighting System For
Motorized Bicycle
- Now you can get the ultimate lighting system for your 2 cycle motorized bicycle by
getting this newly
upgraded LED Lighting system designed for 12
volt lighting.
- This lighting system is a very efficient 12 Volt lighting system because it uses
an LED headlight which is
brighter than a 10 Watt halogen bulb while using a lot lss power; and an LED tail light
which draws very little
current.
- The battery pack consist of a 12 Volt SLA battery of 1.2 Ah.
- The 12 volt headlight for this system uses only about half the power required
for a 10 watt halogen bulb,
but shines brighter.
- The headlight uses two warm white high power LED bulbs which are a similar color
to halogen bulb. Both
headlight and tail light together use only about half the energy of a 10 watt halogen
bulb.
Included in the 12 Volt Complete LED Lighting System
are:
- A Mini-Generator Max for 12 Volt Lighting
- A 12 Volt Mini-Charger to produce significant charge outputs to 12 volt SLA battery
- A 12 VOLT encased battery pack complete and ready for installation on your bike.
- A Special Weather Resistant Light Switch
- A Sealed 12 Volt LED Headlight with two high powered LED bulbs
- Heavy duty tail light with energy efficient LED bulb.
|
- This Mini-Gen Max is easily installed and includes all installation tips and
instructions.
- This will produce over 12 volts AC at about 1300 RPM or driving speeds of about 15 to
20 MPH.
- Volts can reach up to more than 18 volts during high speeds and over 1000 milliamps.
- The Mini-Gen Max and 12 V Mini-Charger work very well together to maintain battery
charge and support the
LED lighting system.
|
- This Lighting System is also available with "Pull Starter type" Mini-Gen Max for
persons with a 2 cycle
pull start engine (can be a substitute if requested).
- The Pull Start Mini-Gen Max is specially designed and shaped to fit within the
space below the pull-starter
cogwheel.
- Just remove the engine magneto cover, then remove the pull starter cogwheel and use
the 2 rear screws to
attach Mini-Generator inside engine magneto case.
- Remove wire grommet at the front (white plastic or black rubber) then insert
Mini-Gen wire into grommet.
- Use a pick or small screwdriver or nail to push into the area where wire will fit,
then insert wire.
- This will produce over 12 volts AC at about 1300 RPM or driving speeds of about 15 to
20 MPH.
- Volts can rise up to 16 or more @ 700 milliamps or more during high speeds.
- This "pull start" type Mini-Gen Max can be included instead of the regular Mini-
Gen Max but only on
request!
|
- After the Mini-Generator is installed, the power wire should be routed toward bicycle
seat post for
Mini-Charger connection.
- Wire inside engine case should be positioned away from moving parts and also make
sure it will not be
pinched under the cover.
- Use duct tape (any color) or cable ties to secure wire onto bike's bottom bracket and
seat post.
- The Mini-Gen in this photo is connected to the red wire coming from the Mini-Charger.
Your results will
look far better than this one.
- NOTE: The purpose of this photo is to give a general idea of how the 12 Volt Mini-
Charger can be
positioned on bike's seat post.
|
- Here in this photo it can be seen how the 12 Volt battery pack appears attached to
this popular beach
cruiser bicycle.
- This battery pack consists of encased 12 Volt SLA battery which will power the lights
when light switch is
turned on.
- The 12V SLA 1.2 Ah battery is more than enough to power the energy efficient 12V
headlight and 12 volt
tail light.
- Use duct tape or cable ties to secure wire, then use duct tape or cable ties to
strap wires to bike frame.
- Your setup will look much better than this!
- The 12 Volt Mini-Charger can be seen on the other side of seat post in this photo.
- An inline fuse is included in the Mini-Charger (battery pos.) wire in case there's an
overload or short.
|
- This 12 Volt encased SLA battery features a 1.2 Ah battery encased, complete and ready
for installation.
This item is also sold separately.
- This battery pack will be charged by Mini-Charger while riding and will maintain a
full charge while
driving.
- This 12 Volt LED lighting system is the top of the line for energy efficient
motorized bicycle light.
- Should batteries become drained or should the fuse blow, this charging system will
still send current
directly to lights to allow a safe ride home (same as our 6 Volt complete lighting
systems)!
- NOTE: The battery pack can also be strapped to some other place on bicycle if
it won't fit on seat
post!
|
- This 12 Volt LED Headlight consist of two high power LED bulbs and will shine quite
brilliantly with a warm
white light.
- This is a custom made headlight made from polyvinyl chloride material with a bubble
type acrylic glass.
- The bubble glass allows you to be easily seen by drivers approaching from side
streets. This increases
safety.
- Light can be grounded directly onto handlebar or grounded separately with a 18"
long ground wire (not
included) connected to bike's front fork crown.
- This 2.25" diameter custom
made headlight can be
mounted in upright position or hung below handle bar if desired.
- Weather Resistant Light switch should be mounted near handle bar near grips
(preferred) or any where you
wish.
|
- The tail light for this Lighting System will be a heavy duty beehive type light of
approx. 2.5" diameter.
- This light can easily be attached to rear frame as seen in photo.
- The single wire tail light will be grounded to frame and connected to positive feed
from light switch.
- The Heavy Duty Tail Light will include an energy efficient 12 volt LED bulb which is
long lasting, and is
red in color. In the unlikely event of a broken lens, the red LED bulb will still provide
a red light.
- Attach tail light, then route tail light wire neatly along bike frame.
- By using strips of duct tape along the insides of bike frame a very neat arrangement
can be achieved.
- The wires from tail light and headlight can be routed along the insides of bike frame
so that they're not
visible.
- Your results should appear better than the ones seen in our photos!
|
- A few photos of this actual 12 Volt LED lighting system can be seen below.
- The oil stain (dark spot) on the street is about 40 feet away.
- This 12 volt LED leadlight/tail light combination is great for reliable night time
lighting on long trips
and dark alleys!
- The 12 Volt LED headlight brilliance will hardly go un-noticed by other drivers.
- This should be angled slightly downward so as not to interfere with oncoming traffic.
- The 12 volt tail light will also be very noticeable to rear approaching traffic.
- If you want the very best of efficiency in motorized bicycle lighting then the 12
Volt LED System will
give you the satisfaction of quality safety you can be happy with.
- NOTE: The LED headlight should be aimed slightly downward so it won't intefere with
oncoming
traffic.
- Don't you owe it to yourself to get the very best self sufficient motorized
bicycle lighting money can
buy!
|
PAYMENTS All payments for auction items and "Buy Now" items are
expected
within 3 days, but no later than 7 days. Payments are accepted through Paypal only. If you
click on "Buy Now"
and then click on "Commit to Buy" you will be expected to complete the transaction by
making payment. If
payment is not made after three days the system is set to automatically remind you about
payment on the fourth
day. If no payment is made within 7 days the system is setup to automatically open a
"Non-Payment case" against
you. If you're not sure about completing the payment just use the new shopping cart
provided by eBay.
This way you are not commited to pay if you change your mind or are unable to complete the
process for some
reason. In any event if you are unable to complete a "Buy it Now" commitment in a
reasonable time, please
contact me about it as a matter of courtesy and understanding.
Serious inquiries about payment for individual items welcome. |
SHIPPING Flat rate shipping & handling price
is available
for the continental USA. Shipping & handling might also be the same for other states
outside the
continental United States. This item will normally ship within 2 business days,
but could take up to 5 business days. To check shipping and handling fees to your state
just click on the
SHIPPING AND PAYMENTS button below top photo on this eBay page. Items will be shipped
to the address
provided for transaction. Request to change shipping address after item is shipped will be
ignored. We
reserve the right to refuse shipment to uncomfirmed addresses in which case the buyer's
payment will be
refunded. Insurance is included for some items based on our
discretion. INTERNATIONAL shipment
of these products are available to international customers but with
slightly higher fees. These slightly higher fees are deemed necessary to cover the
inherent risks involved in
shipping products overseas which don't include precise delivery confirmation and can
sometimes get lost. Some
packages might require signature confirmation to prevent fraud. United States
Postal Service
(USPS) First Class Mail is usually the lowest rate but no tracking number is
provided, however you
will be notified when item ships. USPS Priority Flat Rate is sometimes a
cheaper rate
depending on the product involved. There is also no precise tracking number available for
this service except
to sometimes to indicate when the item is enroute to your country; however you will
be notified when
item ships. USPS EXPRESS MAIL is the only US Postal Service which provides
complete tracking but cost
much more than the other services. Multiple shipping options will be offered with each
product.
INTERNATIONAL SHIPPING TIME
Most items shipped internationally will arrive within 10 to 14 business days but could
take up to 28 days total
based on customs delays in your country and/or holiday schedules. Please allow at least 21
days before
contacting me about package arrivals. PLEASE NOTE Customs duty fees and any
other fees applied to
this product in your country is NOT included in the price of this product and will NOT be
paid by us. You are
expected to be familiar with any applicable import or custom fees associated with products
imported into your
country. To check shipping and handling fees to your country just click on the SHIPPING
AND PAYMENTS button
below top photo on this eBay page. |
***** FEEDBACKS ***** Feedbacks are an important part of eBay
purchasing and customer transaction experience. We would be happy to receive a positive
feedback and five (5)
star rating from all customers who are satisified with our products and/or services.
Feedbacks are normally
left for customers after a positive feedback is received to confirm a successful
transaction.
If you are unsatisfied for any reason, please don't hesitate to contact me. We are always
willing to resolve
any problems you might have. Please don't resort to leaving a negative feedback before
contacting us about a
problem! We reserve the right to block customers who resort to negative feedbacks without
first contacting us
to resolve the problem or customers who are chronically problematic.
|
WARRANTY & RETURNS The SUPER DYNO Lighting
System (patent pending) is warrantied for 14 days cash back, and 30 days replacement. If
you
are unsatisfied for any reason, just return the complete kit, and a refund will be issued
(less shipping and handling). Shipping & handling is not refundable, and the customer
is
responsible for shipping cost of the returned item.If any problems are experienced with
our products, please
contact us for assistance before resorting to any other course of action. NOTE- Any
item showing signs of
tampering or abuse will void warranty! INTERNATIONAL customers are legible
for the 30 days parts replacement warranty ONLY. Customer is responsible for shipping
returned items. |
DISCLAIMER This "SUPER DYNO Lighting System",
and all
parts, pieces, ideas and designs associated therewith, are the proprietary rights and
ownership
of Wonderful Creations Store. Any copying, modifying, tampering and or false claims are
discouraged and expressly prohibited. By purchasing this system you agree to abide
by
any and all traffic laws governing your city, state or country and further agree to hold
Wonderful Creations and any associates thereof, blameless for any accidents, mishaps,
property loss,
damages, death, injuries or expenses reportedly, or supposedly caused by the use, or
misuse
of this lighting system. |