Connects2 SWC.2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.

This interface connects a SONY stereo with a plug input (on the back of the unit) to the existing dynamicsounds00 Stalk/steering wheel controls of the vehicle.

Features & Benefits

• Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls
• Safety: Allows you to keep your hands on the steering wheel and eyes on the road.
• Maintains the original features of the vehicle such as date, time and temperature display
• Choose the relevant head unit connection lead according to the make of aftermarket head unit you wish to fit
• For interfaces where phone buttons are supported, the following brands allow pick up/hang up in Bluetooth mode: Alpine, Clarion, Kenwood, Pioneer and Zenec. Please see icon list below to see if this interface supports phone buttons.
• Please check the connections in the vehicle match the harness you are purchasing

Compatibility:

Car Make / Model	Year	Radio
Ford C-Max	2004 - 2010	(C214, DM2)
Ford Fiesta	2006 - 2008	(JH1, JD3), Visteon 4050/5000/6000/6006/7000
Ford Focus	2004 - 2007	MK2 Pre Face Lift
Ford Fusion	2005 - 2012
Ford Galaxy	2006 - 2015	Mk 3 (WA6)
Ford Mondeo	1998 - 2004	MK1/2
Ford S-Max	2006 - 2014	(1.Generation)
Ford Transit	2006 - 2012	3rd Generation (Post Facelift)
Ford Transit Connect	2006 - 2012	1st Generation

Headunit: 5000C/6000CD/6006CD, Connection: Quadlock (Fakra)

Note: Vehicles with 12V Ignition Feed in Harness

 IMPORTANT NOTES:

If you have a dashboard mounted audio display then this will not work once the new stereo is fitted but your clock and temperature will remain.  

SWC.2 Interfaces C2 Programming tool (C2 RE Flasher) and Programming leads (PROG LEAD 1) are sold separately.

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.

IMPORTANT NOTE: Please make sure that is the correct Stalk Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.

TECHNICAL NOTE:

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.