Connects2 SWC.2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.

This interface connects a PIONEER stereo with a jack plug input (on the back of the unit) to the existing dynamicsounds00 Stalk/steering wheel controls of the vehicle.

Features Highlight: 

• USB Updateable for latest software version
• Works with CAN-Bus
• Park Brake
• Reverse Gear
• Ignition
• Illumination
• Speed Pulse

Compatibility:

Car Make / Model	Year	Radio
Mercedes C-Class (W203)	2001-2004	W203 Model, Audio 10/ Audio 30/ APS (D2B)
Mercedes CLK	2001 - 2004	W209 Model, Audio 10/ Audio 30/ APS (D2B)

Connection: 10 way ISO

 CAN-BUS: Yes

IMPORTANT NOTES:

If you have a dashboard mounted audio display then this will not work once the new stereo is fitted but your clock and temperature will remain.  

SWC.2 Interfaces C2 Programming tool (C2 RE Flasher) and Programming leads (PROG LEAD 1) are sold separately.

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.

TECHNICAL NOTE:

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE: Please make sure that is the correct Stalk Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.

If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.