NEW! From Master Grooming Tools Professional Grooming Products
Master Grooming Tools Silver Series Antimicrobial PRO Clipper Blades
*Prices (vary)
are per blade
*You pick size or sizes you want from drop down menu or tabs
Master Grooming Tools™ Steel Clipper Blades have a new, revolutionary antimicrobial coating that is fused into blade that helps to inhibit the growth of bacteria, mold, fungi, and mildew (similar to the Oster CryogenX Agion blade but instead of just being coated these blades have the antimicrobial agent fused into the blade-this means unlike the Agion blades where the coating wears off after a while, on these blades they will stay free from the growth of bacteria, mold, fungi, and mildew for the life of the blade). Your blades will last longer and perform better.
Silver Series Steel clipper blades are made from high-carbon steel and processed through a unique carburizing heat treatment that actually adds carbon to the metal, producing a harder cutting surface. Blades hold a razor sharp edge that will endure prolonged use and more sharpening treatments.
*Comparable in quality and performance to Oster CryogenX, Andis UltraEdge, Wahl Competition blades at a fraction of the price!
Brand new in manufacturers original package!!!
*Beware of other clippers, blades and products which are knock-offs or are being sold as new when are actually used, re-furbished, returns or older models...we are an authorized, independent retailer, Grooming & Pet Supply Shop and sell only NEW, Top Quality products.
*BELOW ARE SUGGESTED USES and A“BASIC” CHART WITH SUGGESTED USES FOR EACH BLADE SIZE - Please note that these are only suggested uses.
BLADE USES (also see chart below):
Size 50 Blade has a 1/125" / 0.5 mm Blade Cut
A # 50 blade is a "surgical" blade - used alone will cut hair very, very close. Frequently used by vets for surgical preparation. Good for surgical trims, and for poodle feet and faces. Also used when making patterns in hair.
Size 40 Blade Leaves hair 1/100", 0.25 mm long
Best used for ears, eyes and pads and is more generally used with Clip on (AKA
Universal, Snap On, Guide, Attachment, Guard) combs to achieve uniform and
longer hair lengths...I do also sell the clip-on comb sets separately. The Size
40 Blade if used without a comb attachment should only be used by experienced
groomers as it cuts very close. An ideal blade for show poodles. This blade is
also used by veterinarians for prepping pets for all types for surgery though a
size 50 blade is more commonly used.
Size 30 blade has a 1/50" (.5 mm) blade cut
A # 30 blade is a "surgical" blade - used alone will cut hair very close. Can be used on feet or between pads and is more generally used with Clip on (AKA Universal, Snap On, Guide, Attachment, Guard) combs to achieve uniform and longer hair lengths...I do also sell the clip-on comb sets separately.
Size 15 blade leaves hair 3/64"/1.2mm.
Frequently used on ears, feet, tail base, face, sanitary area and throat. Common blade for Horse Grooming/Clipping. Also can be used for very short cuts on body of any breed. The Size 15 Blade is often used on Poodles for clipper work on the face, feet and tail. The Size 15 Blade is ideal when the Size 10 Blade is not smooth enough and a Size 30 Blade is too close. This blade can also be used for sanitary prep.
Size 8 1/2 blade leaves hair 7/64"/2.8mm long.
This blade is a good choice when a Size 10 blade is too close for sensitive skin. Use this blade for face, necks and short cut on bodies. Leaves a very smooth finish. Use this blade for body work on any breed.
Size 9 Blade leaves hair 5/64"/2mm long.
Use this blade for face, necks and short cut on bodies of any breed. Leaves a very smooth finish. Popular on Cockers, Springers and Schnauzer bodies, and similar breeds.
# 10- leaves hair 1.8mm /1/16" long
*MOST COMMONLY USED Size 10 clipper blades have a 1/16" blade cut (1.8 mm) that’s ideal for underbelly work, terrier ears, and poodle faces— a good choice if a fairly close and smooth finish is desired. Ideal for underbelly work, terrier ears, and poodle faces
Often used for stripping coats when the mats are close to the skin. A popular choice for groomers who are doing body work on schnauzers. Suitable for all breeds of dogs and cats, horses, etc.
Finish or “F" (also referred to as FC or Finish Cut ) Blades
3F, 4F, 5F, 7F, 5/8HT, etc. (also referred to as 3 3/4
FC, 4FC, etc)
The teeth on this blade are even, creating a smoother finish. Can be used
before and after the bath. Used for a smoother finish or full shavedowns. Work
best on coats that are clean, dry and brushed out..
A 3 3/4F blade will leave hair, has a ½”/13mm long cut (also referred to as 3F, 3 3/4 FC, 3FC)
# 3F -This size is used to achieve a smooth, velvety finish on any breed. Use this blade for a smooth finish that most closely resembles hand scissoring Blade of choice for a short clip on a mixed breed, lhasa, shih tzu, yorkie or maltese. This blade can be used for body work on any breed where a longer length is desired. Is used for finishing the coat after trimming with a #3 skip tooth blade Leaves a nice, long finished length on all breeds of dogs and cats, horses, etc
Size 4F Blade has a 3/8" / 9.5 mm Blade Cut
Full/Finish cut blade can be used as a finish blade for a size 4 Skip Tooth blade, also for body work on short-legged terriers (westie, etc.) and poodles, and short puppy cuts on Lhasa’s or any other breed.
This blade can be used for body work or clips on any breed. Also used against the lie of the coat of thick-coated Springers or Cockers for a very short but very smooth look. Suitable for all breeds of dogs and cats, horses, etc
Size 5F Blade has a 1/4" / 6mm Blade Cut
Most often used to achieve a smooth, short "lamb" like clip or finish on any breed. Is effective for finishing the coat after trimming with a #5 skip tooth blade Leaves a nice finished length on the coats of wire, welsh, and Lakeland terriers Suitable for all breeds of dogs and cats, horses, etc
Size 7F Clipper Blade has a 1/8" (3.2 mm) blade cut.
# 7F - Finish Cut blade can be used as a finishing blade for a Size 7 Skip-Tooth, as well as for body work on any breed. Frequently used on unmatted cats. Suitable for all breeds of dogs and cats, horses, etc.
Size 5/8 HT leaves hair 5/8" (16mm) long!
# 5/8HT - This size blade is the one of the LONGEST in the Barber & Beauty trade as well as the Animal Grooming industry, cuts smoother and moves through hair easier than a blade with an attachment comb. This is a full cut blade used for body work on any breed especially on pet bichons and poodles, short puppy cuts on lhasas, shih tzus, and similar breeds. Works well on unmatted dogs.
Skip Tooth Blades (also called saw tooth blades) - 3, 4, 5 or 7
A NOTE regarding Skip Tooth Blades
Skip Tooth Blades are generally used instead of a finish cut blade when:
Hair or coat is heavily matted or for VERY thick
coats.-The coarse or uneven teeth on a Skip Tooth will feed the hair into the
cutting blade more effectively, which allows you to clip under mats.
Often used before the bath for rough-cuts, and on dogs that must be shaved
completely down. Perfect for blending short areas with longer lengths. Ideal
for coarse-coated breeds such as Terriers
A hair cut using a skip tooth blade is generally "finished" off with the same size finish blade to give coat a smooth, finished appearance...for example: if you cut hair with a 4 skip-tooth blade, finish off with a 4F blade
Be extra Careful when using as skip tooth blade as they cut closer to the skin. Skip Tooth blades are not recommended to be used on cats.
Size 4 Skip Tooth Blade has a 3/8" / 9.5 mm Blade Cut
This blade can be used for body work on any breed when a little bit longer cut is desired. Most often used for Body work on the low-slung Terriers (West Highland White, Scottish, Cairn, etc.), Pet Poodles, short trims on Lhasa Apsos and Shih-Tzus.
The Size 4 Skip Tooth blade cuts through mats that finish cut (FC or F blades) blades cannot penetrate. The coat is more accessible to the cutting blade because of the flat design of this blade. The teeth are more open which allows the coat to be cut easier than the 4F blade with its full teeth. A hair cut using a skip tooth blade is generally "finished" off with the same size finish blade to give coat a smooth, finished appearance-skip tooth blades will leave an unfinished, jagged like appearance....for example: if you cut hair with a 4 skip-tooth blade, finish off with a 4F blade.
Size 5 Skiptooth blade leaves 1/4" - 6.5mm
Frequently used on fluffy type coats such as Poodles, Bichons and dogs with similar type coats. Also body work on Sporting Breeds and Terriers, Pet Poodles, body work on short trims on Lhasa Apsos and Shih-Tzus.
The Size 5 Skip Tooth blade, like the size 7, cuts through mats that longer length blades cannot penetrate. The coat is more accessible to the cutting blade because of the flat design of this blade. The teeth are more open which allows the coat to be cut easier than the 5F blade with its full teeth.
Size 7 Skip Tooth Clipper Blade has a 1/8" (3.2 mm) blade cut.
Size 7 Skiptooth blade leaves 1/8". This blade can be used for body work on any breed. Suitable for all breeds of dogs and cats, horses, etc. The shortest of the skip tooth blades, the Size 7 is used frequently on very matted dog coats. The Size 7 Skip Tooth blade cuts through mats that other length blades cannot penetrate. The coat is more accessible to the cutting blade because of the flat design of this blade. The teeth are more open which allows the coat to be cut easier than the 7F blade with its full teeth.
Size 5/8 wide (also called 5/8n (narrow) or 5/8w) blade has a 1/32"/0.8mm blade cut.
Cutting surface is 5/8" across. For small areas. Commonly referred to as a “foot” or “feet” blade this is also good for clipping small areas. Ideal for setting patterns such as the Dutch Clip on Toy Poodles, great for small Poodle feet.
Compatible Clippers:
*NOTE: Blades WILL NOT FIT ALL CLIPPERS-Compatible with most Hair Stylist, Barber and Pet Grooming corded and cordless Clippers from Oster®, Andis®, Conair®, Laube®, Geib®, Moser®, Aesculap® and Wahl® which take full size, professional, detachable style (also called A5,AG or BG) clippers.
(Note: list may not be complete as manufacturers are always coming out with new models-If your clipper model is not on list please ask before purchasing and I check to see if compatible):
Oster® A5® models:
A6, A6 Slim, Turbo, Golden, Powermax, Performax, Ultra PowerPro and Powerpro, Outlaw, Outlaw Ink, Volt, Classic 76, 97, Octane, Star-Teq, Power-Teq, Oster PRO3000i Cordless Lithium-Ion
Andis® models:
Fits all Andis detachable blade clippers in these series: AG, AGC, BDC, BG, DBLC, FHC, MBG, SMC
Endurance, Andis® Pulse ZR Lithium 5-Speed Cordless, MBG-2 20910, MBG2 20995, MBG-2 21420, AG 21465, MBG2 21485, AG 21730,AG2 22215, AG2 22235, AGC2 22330, AGC2 22340, AGC 22345, AGC 22350, AGC2 22360, AGC2 22405, AGC2 22440, AGC2 22445, AGC2 22465, AGC 22545, AGC2 23085, AGC2 23090, AGCL 23170, AGCL 23175, AGCL 23225, AGP 27370, AGP 27435, AGP 27640, AGRV 63360, AGRC 63785, AGR+ 63855, AGRC 63970, AGC2 64575, AGRC 64770, AGR+ 64800, AGR+ 65340, SMC 65410
AG®, AGC®, AGP, AGR, BG, BGC, BGR, MBG, Powergroom, AGR+,
BGR+, AGRC, AGRV, BGRV, Ceramic Advanced™ Detachable Blade Clipper
(Model:21490)
- Excel™ Detachable Blade Clipper (Model:22310)
- BGRC Detachable Blade Clipper (Model:63965)
- MGX Detachable Blade Clipper (Model:21495)
- Excel™ 2-Speed Detachable Blade Clipper (Model:22315)
- BGR + Rechargeable Detachable Blade Clipper (Model:64850), etc.
Laube® models:
Litening / Cowgirl / Xpress / Clippers, Mini Micro / Thunder / Xpress / Clippers, 503 Lazor, 513, 505 Super Cordless, 521 Mini Lazor, 523 Variable Speed MINI LAZOR, 544 Mini Lazor CORDLESS Clipper, 553, 555, 573, Lightening/Micro, 881 iCLIP, 851 iVAC
Moser models:
KM1/Max 45/Alavon/Artiko,Class 45
Thrive models:
900N/50 range
Aesculap®
German Red Clipper
FAV5CL Cordless
German Red Clipper, FAV5 Corded
Wahl® /Moser models:
Switchblade, Storm, KM1®, KM2®, ProFicient, Rapid Fire, KM5, KM10, KM Cordless, SS-Pro
GEIB Models:
Geib Zero Heat 2-Speed Clipper
CONAIR models:
ConAir Canine FX Dyna-Groom II Professional 2-Speed Clipper, ConAir Canine FX Turbo-Groom II Clipper 2-Speed, ConAir Canine FX Lightweight Power Clipper, Conair Dyna-Groom 2 Speed Clipper
GTS Clippers
888, GTS888
Only available through independent retailers
BRAND NEW!
*Beware of other products being sold as new when they are actually counterfeits/fakes, used, returns, re-furbished or older and outdated...we are an authorized, independent retailer; Groomer, Hair Stylist/Barber & Pet Supply, etc. Shop and sell only NEW, Top Quality grooming, hair stylist, barber and other miscellaneous products.
I sell all kinds of Top Quality Grooming products and Pet Supplies from top brands such as Oster, Andis, Laube, Wahl, Mars, Aesculap, Master Grooming Tools, Paw Brothers, Coastal, Millers Forge, Resco, Top Performance, Master Equipment, ProSelect, Guardian Gear, Aria, Intellipet, Total Pet Health, Clean Go Pet, Slumber Pet, Casual Canine, Geib, etc. and all kinds of Bandanas (Hav-A-Hank, etc.), Fitted Bandanas (Hav-a-danna, Amazing Danna Doo rags or Skull caps), USA Made Flags, similar items and a whole lot more in my Ebay Store...We are always adding new products so be sure to check it out!
Visit my store: HappyPaws Grooming and Pet Supplies
Be sure to add me to your favorites list!
RETURNS/REFUNDS/EXCHANGES
All returns are accepted. We try to accurately and honestly describe all our products and handle returns in a fair and reasonable manner. All items, unless otherwise stated, are new with manufacturer’s warranty (if any warranty-this will be stated in item description). RETURNS: Most items can now be returned via eBay’s automated return system which will provide a return label and other info. (Under your eBay purchases there will be a link next to the item purchased for returns). Please be sure to select correct reason for return e.g. just didn't like it, does not fit, found better price, changed my mind, item defective, etc. EXCHANGES: Exchanges are easiest & quickest to process by doing return through automated EBay system for item you don't want and then just buying item you want. Once I receive return I will process refund. If you find item to be or damaged on arrival, please notify me via email prior to opening return and I will try to correct issue or problem. Items must be returned in same condition they were sent to you in-new, clean condition in original packaging with all original parts, tags, papers, boxes, etc. If item is not returned in new condition or with all original paperwork/boxes, etc. a restocking fee may be charged, or you may only receive a partial refund. After return period please refer to manufacturer’s warranty (if any).
COMBINED SHIPPING
Yes, I do offer a combined shipping discount on most items I sell. All items must be paid for on one invoice to qualify for shipping discount. Please purchase items you want but do not pay until I have sent you a combined invoice with shipping discount applied. If in question, please message me before making payment.
*International Buyers – Please Note:
Import duties, taxes, and
charges are not included in the item price or shipping cost. These charges are
the buyer's responsibility.
Please check with your country's customs office to determine what these
additional costs will be prior to bidding or buying. Also, you may experience
delivery delays or experience longer shipping times due to customs-related
delays.
I am a USA seller selling Products made for use in the USA & CANADA-unless otherwise stated in ad description ALL items are set up for USA/Canada 110 volt and would need some type of voltage transformer and/or plug adapter (generally available at any electronics store) to work properly outside of USA/Canada.
I buy in large wholesale quantities / lots at a major discount and pass on the savings to my customers.
Yes, I do also sell almost everything I sell in WHOLESALE QUANTITIES at WHOLESALE PRICES...Email me for quote if interested!
If Any Questions, Please Ask Before Buying or Bidding
Thank You for Looking!