Vauxhall Double Din Radio Replacement Kit, allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. This kit includes double din fascia, steering stalk controls, and aerial connections.

Kit Includes:

• Double Din Fascia Adaptor
• Steering wheel Control Adaptor 
• USB Retention Lead
• Fakra Aerial Adaptor
• Stereo Patch Lead (Free CTMULTILEAD.2 Included)

This Kit allows fitment in the following vehicle:

Car Make / Model	Year	Remarks
Vauxhall Vivaro	2014 - 2018	(B)
Opel Vivaro	2014 - 2019	(B)

Not suitable for vehicles with the sat nav system.

USE THE ORIGINAL TOP ORIGINAL SCREW POSITION FROM THE VEHICLE FOR THE TOP OF THE BRACKET AND FOR THE LOWER POSITION YOU NEED TO DRILL A NEW PILOT HOLE

SOME VEHICLES WITH STOP START FEATURE WILL REQUIRE AN INTERFACE TO BE INSTALLED INLINE WITH THE POWER ISO PLUG OF THE NEW STEREO.

THE INTERFACE WILL ALLOW THE UNIT TO STAY POWERED WHEN THE VEHICLE ENGINE SHUTS DOWN AND RESTARTS.

IF YOU ARE EXPERIENCING THIS WITH YOUR NEW INSTALLATION YOU WILL NEED A 10-603 ADAPTER IN ADDITION TO THE FITTING KIT.

Part in question is:

https://www.ebay.co.uk/itm/373793903710

PATCH LEAD This interface connects a compatible car stereo with a joystick input (blue line-in mini-jack) or wire input on the back of the unit to the existing stalk/steering wheel controls of the vehicle.

Universal head unit connection lead for:

• Alpine (3.5mm jack)
• Beat (single wire connection)
• Chinese / Xtrons / 3 wire unbranded units (3 wire connection)
• Clarion (3.5mm jack)
• JVC (3.5mm or single wire)
• Kenwood (single wire)
• LG (3.5mm jack)
• Nakamichi (single wire connection)
• Panasonic  (single wire but NOT AV units)
• Philips (single wire connection)
• Pioneer (3.5mm jack)
• Sony (3.5mm jack)
• Zenec  (single wire)
• Other Chinese SWC learning head units

Notes:

• You can simply cut the loops / wires to select which brand you are fitting.
• Supplied with instruction sheet

IMPORTANT NOTE:

• This patch lead CANNOT be used for Blaupunkt / Parrot / Becker / JVC KW-AVX  head units / Older Kenwood units with the DIN plug.
  For those models you need to purchase the lead from our eBay Store. Click here for additional patch leads

Important Fascia Notes: 

• The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

IMPORTANT NOTE: Please make sure that is the correct  Fitting Kit for your car by firstly checking to see if your make, model  and year of car is listed in the advert. Secondly by checking to see if  the connection in the picture listed is the same as you have in your  vehicle.