This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. 

Please Note: There is an Aerial Adaptor also included with the Wiring Adaptor.

Compatible with following vehicles:

Car Make / Model	Year	Remarks
Audi A2	2005 Onwards	Vehicles With Single FAKRA Antenna Connector Connection: Quadlock (Fakra)
Audi A3	2005 - 2012
Audi A4	2005 - 2015
Audi A6	2004 - 2011
Audi TT	2006 - 2014
Seat Alhambra	2006 Onwards	Vehicles With Single FAKRA Antenna Connector Connection: Quadlock (Fakra)
Seat Altea	2004 Onwards
Seat Cordoba	2005 Onwards
Seat Exeo	2009 Onwards
Seat Ibiza	2008 - 2016
Seat Leon	2005 - 2012
Seat Toledo	2005 - 2015
Skoda Fabia	2007 - 2014	Vehicles With Single FAKRA Antenna Connector Connection: Quadlock (Fakra)
Skoda Octavia	2004 - 2013	Vehicles With Single FAKRA Antenna Connector Connection: Quadlock (Fakra)
Skoda Roomster	2006 Onwards	Vehicles With Single FAKRA Antenna Connector Connection: Quadlock (Fakra)
Skoda Superb	2008 Onwards	Vehicles With Single FAKRA Antenna Connector Connection: Quadlock (Fakra)
Skoda Yeti	2009 - 2014	Vehicles With Single FAKRA Antenna Connector Connection: Quadlock (Fakra)
Volkswagen EOS	2006 - 2016	Vehicles With Single FAKRA Antenna Connector Connection: Quadlock (Fakra)
Volkswagen Fox	2005 Onwards
Volkswagen Golf	2003 - 2013
Volkswagen Passat	2005 - 2015
Volkswagen Polo	2005 - 2014
Volkswagen Scirocco	2008 - 2015
Volkswagen Touareg	2003 - 2015
Volkswagen Touran	2003 - 2015

Please Note: This Item is For Vechiles Fitted with one of the Following Stereos - RCD 200 / RCD 300 / RCD 500 / VW DELTA 6 / RCD 310 / RCD 510

Please Note

• Red wire has to be connected to a separate ignition feed in the vehicle to make aftermarket head unit to power up
• Orange cable requires connection to illumination wire but only if the radio requires this for dimming purposes at night.
• Blue wire needs to be connected to the Remote Antenna or ignition supply wire (if rem ant wire not available) on back of car stereo.

Please Note:

• When connected your new stereo may not power up, and this is no fault of the wiring harness purchased.
• Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition switched live feed.
• In these cases it is necessary to manually connect a spurred live feed from fuse box for example to feed switched power so the new stereo turns on and off with the key.
• The wire in particular on the new wiring harness will be the red wire.

IMPORTANT NOTE: Please make sure that is the correct Wiring Harness for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.