Made To Measure Blackout Diamanté Roller Blinds
How To Order Your Custom Blinds
- Measure the recess Width x Drop of the area where you are fitting the blind
- From the drop down menus select the option your measurements fit within
- Add all required blinds to your basket
- Complete checkout
- Use the "Contact Seller" button to email us your specific sizes
Important Notes
- If sizes are not received within 24 hours then your order will be sent at the maximum size
- If you purchase a smaller size range than the sizes you request making to, we will Cancel and Refund your
order
- Please use the 'recess' measuring guide shown in the images above
- ONLY provide the RECESS size, WIDTH x DROP. Blinds will be made to the sizes you provide (material will be approx 4cm narrower)
- These items are excluded from our returns policy and therefore non-refundable
- Please allow suitable time for manufacture. See estimated dispatch times above
- We will leave excess material on the drop of your blind to ensure the tube is completely covered and to give the blind stability. You will then roll down the amount you require. We therefore ask for the drop size to allow us to make your blind suitable.
Item Features
- Diamanté trim - approx 5cm deep
- 100% Blackout fabric
- Metal inner roller tube, 25mm
- Brackets allow for Top or Face fitting
- Includes child safety clip
- Easily wiped clean and maintained with a damp cloth
finer details
- Diamante strip situated approx 65mm from the bottom of the blind. Every square centimetre has approx 4 diamante beads. It will cover the entire width of the blind you choose.
- Two way fitting so you can have top or face fix, simply choose the appropriate hole in the bracket. Sidewinder operation with child safe tension cord to be fitted at least 1 metre off the ground
- You need at least 10cm depth to fit this blind. Please take care when measuring that protruding handles and dado rails will not interfere with the fabric. You can have the fabric rolled over the tube instead of behind to avoid handles.
- Metal roller tube with fabric attached by slotting into the indent. Due to tube indent this may not be suitable for use with other fittings. Please use the fittings supplied
- If you want complete darkness in your room we suggest fittings outside the recess and measuring at least 15cm wider than your window recess. Remember, the fabric will always be approx 4cm narrower than the recess size you provide. Fabric will be weighted down with a bottom plastic lathe.
- You need at least 10cm depth to fit this blind. Please take care when measuring that protruding handles and dado rails will not interfere with the fabric. You can have the fabric rolled over the tube instead of behind to avoid handles.
item description
Taking a classic to the next step with a sprinkle of sparkle. Taking the classic straight edge roller blind and add a shiny strip of diamante elevates this to the next level and giving you that little touch of class you've been after