Hydro Dipped Auto Darkening Welding Helmet Sticker Bomb Design |
Our new line of Hydro Dipped Design products is now available in our Welding Helmets. This particular helmet features the Sticker Bomb Design and covers the surface of the welding hood and inside the pattern you will find a Sticker Bomb print. Since each helmet is dipped one at a time the placement of the pattern will slightly different making it different and special. And to finish the product, it is covered with a high gloss finish.
Starting with our best value auto darkening welding helmets by Pyramex™ we proceed to the hydro dipping process. These auto darkening helmets reacts to the bright light from the welding process. Adjusting from the clear grinding process to the welding light with an easy control knob on the left side of the helmet adjustable from a AWS shade 9 to a shade 13.
Measuring 4 inches wide by 2 inches high the auto darkening welding lens is adjustable for sensitivity and delays to fine tune the shading of the lens.
These helmets feature a lightweight shell construction made with a high impact resistant nylon material. They also features an ergonomic design with the suspension that adjust fully to get the best possible fit. The suspensions in the Pyramex auto darkening welding helmet adjust to fit the contour of the head as well as to adjust the tension making it easier to flip the hood up and down with comfort and ease.
To stay safe and perform your welds correctly it features a high-speed lens that operates at 1/30000n seconds. The lens are powered by solar cells and a replaceable lithium battery. The Pyramex™ Auto Darkening helmet also comes with 4 independent arc sensors that are set up in a staggered design to deliver reliable arc detection.
Before hydro dipping with the design each lens is removed from the shell and replaced back in the helmet followed by testing for accuracy before being shipped.
Now you can show off a little of your personal style with the Sticker Bomb Design printed on the welding helmet. |
Features: |
- The helmet protects the head, neck and face
- Eliminates the issue of welder’s fatigue
- Precision lens operates at 1/30000 seconds
- Fully adjustable nylon suspension
- With a strong and lightweight shell
- Has auto darkening from shade AWS 9 to 13
| |
Notes: |
- Since the welding hoods have been modified from the factory, we can not say they are ANSI approved; however, we are taking a NEW ANSI approved welding hood then adding several layers of paint, ink, and glossy coating to the outside shell.
- Being that the image is flat and it is being placed on a very rounded surface, the pattern might have a little stretching as it appears on the back of the welding hood, it kind of gives the look of a windswept affect towards the back of the welding helmet.
- Currently we have all the patterns in stock, and we can usually produce the hats in 1-2 days. However, in the case of back orders or larger orders there may be an additional 2-4 day lead time.
| |
|