Product Details

24V 4 Channel
 

1. The module uses genuine quality relay , normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;

2. Using SMD OPTOCOUPLER isolation , driving ability , stable performance ; trigger current 5mA;

3. The module has a 24V working voltage options ;

4. Each way module can be set high or low triggered by jumper ;

5. Fault-tolerant design , even if the control line is broken , the relay will not operate ;

6. The power indicator ( green ) , 4 relay status indicator ( red )

7. Interface design humane, all interfaces can be connected directly via terminal wiring leads , very convenient

8. Module size : 73mm * 50mm * 18.5mm ( L * W * H )

9. Has four mounting bolts holes , hole 3.1mm, 67mm * 44.5mm pitch

Interface :

1. DC +: positive power supply ( voltage required by the relay has 24V option)

2. DC-: negative power connection

3. IN1-IN4: each way based on the settings , can be high or low to control the corresponding relay

12V 4 channel

 

1. The module uses genuine quality relay , normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;

2. Using SMD OPTOCOUPLER isolation , driving ability , stable performance ; trigger current 5mA;

3. The module voltage is 5V, 9,12 V, 24V are available ;

4. Each way module can be set high or low triggered by jumper ;

5. Fault-tolerant design , even if the control line is broken , the relay will not operate ;

6. The power indicator ( green ) , 4 relay status indicator ( red )

7. Interface design humane, all interfaces can be connected directly via terminal wiring leads , very convenient

8. Module size : 73mm * 50mm * 18.5mm ( L * W * H )

9. Has four mounting bolts holes , hole 3.1mm, 67mm * 44.5mm pitch

 

Interface :

1. DC +: positive power supply ( voltage required by the relay , there 5V.9V.12V and 24V choice )

2. DC-: negative power connection

3. IN1-IN4: each way based on the settings , can be high or low to control the corresponding relay

 5V 2 Channel

1.The module uses genuine quality relay , normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;

2.Using SMD OPTOCOUPLER isolation , driving ability , stable performance ; trigger current 5mA;

3.The module voltage is 5V, 9,12 V, 24V are available ;

4.The module can be set to high or low triggered by jumper ;

5.Fault-tolerant design , even if the control line is broken , the relay will not operate ;

6.The power indicator ( green ) , relay status indicator ( red )

7.Interface design humane, all interfaces can be connected directly via terminal wiring leads , very convenient

8.Module size : 50mm * 41mm * 18.5mm ( L * W * H )

9.Has four mounting bolts holes , hole 3.1mm, 44.5mm * 35.5mm pitch

Interface :

1. DC +: positive power supply ( voltage required by the relay , there 5V.9V.12V and 24V choice )

2. DC-: negative power connection

3. IN1: 1 channel signal to trigger the end , you can set a high or low level control relay

3. IN2: 2 -channel signal to trigger the end , you can set a high or low level control relay

24V 2 Channel

1 .The module uses genuine quality relay , normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;

2 .Using SMD OPTOCOUPLER isolation , driving ability , stable performance ; trigger current 5mA;

3 .The module voltage is 5V, 9,12 V, 24V are available ;

4 .The module can be set to high or low triggered by jumper ;

5 .Fault-tolerant design , even if the control line is broken , the relay will not operate ;

6 .The power indicator ( green ) , relay status indicator ( red )

7 .Interface design humane, all interfaces can be connected directly via terminal wiring leads , very convenient

8 .Module size : 50mm * 41mm * 18.5mm ( L * W * H )

9 .Has four mounting bolts holes , hole 3.1mm, 44.5mm * 35.5mm pitch

Interface :

1. DC +: positive power supply ( voltage required by the relay , there 5V.9V.12V and 24V choice )

2. DC-: negative power connection

3. IN1: 1 channel signal to trigger the end , you can set a high or low level control relay

3. IN2: 2 -channel signal to trigger the end , you can set a high or low level control relay

Package Included:1 x  Relay Module

 

  • EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
  • Payment must be received in 5 business days of auction closing.
  • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

  • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

    We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

DataCaciques