M Cuff 8.6 to 14.2 Inches

L Cuff 11.8-16.5 inches

• FDA approved and CE certified. Don't take chances with non-FDA approved devices
• Easy to use, with automatic inflation and reading of blood pressure and heart rate
• Easy-to-read big 4 inch LCD display 3.31 x2.17 inch
• Irregular heart beat detection ,60x2 memories for 2 users ,last 3 results average
• WHO blood pressure classification indicator ,low battery indicator , auto shut off function conserve your battery life
• 1-Year Warranty: Money-back satisfaction guarantee

Note Requires 4 AA batteries (not included) or AC adaptor 6V1 A (available separately)

Important Note
-Be sure to order the correct size for your upper arm measurement.
-Apply cuff as illustrated in the manual and tighten firmly before starting the reading.
-Take blood pressure at the same time every day. In the morning shortly after getting up is best.
-Avoid eating, alcohol, smoking, exercising, medications, and bathing for 30 minutes before measuring blood pressure.
-Rest in a chair for 5 to 10 minutes before taking a reading.
-Sit in a comfortable position and rest your arm on a table at approximately heart level for the reading.
-Note that your blood pressure can vary significantly in as little as a few minutes.
-For maximum accuracy you can use the option to average your last 3 readings.

Feature

Measurement Range
Pressure: 0mmHg-300mmHg
Pulse: 30-180 Beats/Minute

Measurement Accuracy
Pressure:±3 mmHg
Pulse:±5%

Pressurization
Automatic Pressurization

Memory
120 memories in two groups
with Date and Time

Unit Weight
Approx. 10.72oz(Excluding Batteries)

Unit Dimensions
6.54x4.49x2.83 Inches

About Power Adapter

 UL listed, compatible with LotFancy upper arm blood pressure monitor only,NOT suitable for  Omron blood pressure monitor
Safe, high efficiency and reliability; automatic overload cut-off
Automatic thermal cut-off; short circuit and over voltage protection,low interference & noise,
Input: 100V-240V AC, output: DC 6V 1A, 5.5 x 2.1mm connector, power cord about 47 inches
Connector inside positive (+) outside negative (-)
1-Year Warranty: Money-back satisfaction guarantee

Compatible list:

SKU and FNSKU  on the package of blood pressure monitor
11A-1802-H 11A-1804-J 11C-1823-C 11C-1826-F  11C-1831-K 11C-1833-M 11C-1834-N 11C-1835-O
11C-1836-P 11C-1850-D 11C-1851-E 11C-1859-M 11C-1860-N 11C-1861-O 11C-1862-P X000N9C9SP
X000N9C2NR X000TF9VDJ X000TG66S1 X000THQ0PT X000UJ9JP9 X000UIG67J X000UIJIQ5 X000UIJJ8H
X000YBBAU5 X000WLAJ7R X000YBBATV X000WLI1E5 X000YXHT4J X000YXHT03 X000YXHSSB X000YXHSFT
Blood pressure monitor model :
BP-103H  BP-1305  BP-1326  TMB-1490-C  TMB-1018-A  BPM61

Note:

Choose the suitable cuff:too big or too small will affect the accurate reading.

Cuff Application:1. Put your left arm through the cuff loop. The bottom of the cuff should be about 1 - 2 cm above

 your elbow(thickness of your index or middle finger). Adjust the cuff around your arm so that the tubing runs down

 the centre of your arm in line with your middle finger.
2. Secure the cuff around your arm using the cloth closure. Pull the cuff so that the top and bottom edges are 
tightened evenly around your arm.
3. Secure the cuff firmly but not too tight - just enough so that it is difficult to slide 2 fingers under the cuff. This space is
 imperative for an accurate reading because this digital Blood Pressure Monitors use the Oscillometric method of blood
 pressure measurement that detects your blood's movement through your brachial artery and converts this movement 
into a digital reading.Before Taking a Measurement:Avoid eating, drinking alcohol, smoking, exercising, and bathing for
 30 minutes and rest for 15 before starting the measurement. Avoid taking a measurement during stressful times. 
Take the measurement in a quiet place.Body Position:Sit in a chair with your feet flat on the floor. Rest your arm on 
a table with your palm facing upward. The cuff should be level with your heart. Do not talk or move during the 

measurement.
For additional information please refer to the Instruction Manual for your device.
Q: What is the difference between measuring blood pressure at home or at a professional
healthcare clinic?
A: Blood pressure readings taken at home are now seen to give a more accurate account as
they better reflect your daily life. Readings can be elevated when taken in a clinical or
medical environment. This is known as White Coat Hypertension and may be caused by
feeling anxious or nervous.
Note: Abnormal test results may be caused by:
1. Improper cuff placement
Make sure cuff is snug-not too tight or too loose.
Make sure bottom of the cuff is approximately 1-2cm (1/2'') above the elbow
joint.
2. Improper body position
Make sure to keep your body in an upright position.
3. Feeling anxious or nervous
Take 2-3 deep breaths, wait a few minutes and resume testing.
Q: What causes different readings?
A: Blood pressure varies throughout the course of a day. Many factors including diet,
stress, cuff placement, etc. may affect an individual's blood pressure.
Q: Should I apply the cuff to the left or right arm? What is the difference?
A: Either arm can be used when testing, however, when comparing results, the same arm
should be used. Testing on your left arm may provide more accurate results as it is
located closer to your heart.
Q: What is the best time of day for testing?
A: Morning time or any time you feel relaxed and stress free.

 Why do my blood pressure readings seem to vary?

There are are several reasons why you may have inconsistent readings. Many factors exist that can
cause a variation in blood pressure measurement values, for example, recent activities or even the time
of day can alter the reading. Additionally, the user's technique is very important for reliable measurement
results. Listed below are some of the common reasons you may see an inconsistent or inaccurate reading:

Cuff Size It is very important to use the appropriate size cuff for your arm to obtain accurate measurement 

results when using your blood pressure monitor. In order to determine the appropriate cuff size, you need to 

measure the circumference of your arm. You should periodically measure your arm size. This is especially 

true if you have a borderline arm size measurement, or you may have gained or lost weight. It is important to

 ensure the arm cuff you are using with your monitor is the correct size for you. If the incorrect cuff is used 

the result may be an inaccurate reading and/or the cuff will be damaged (air bladder). To determine your arm 

size, use a cloth tape measure and place the tape measure midway between your elbow and your shoulder 

around the circumference of your upper arm. Wrap the tape measure evenly around your arm.

Do not pull the tape tight. Note the precise measurement in centimetres.

Cuff Application 

1. Put your left arm through the cuff loop. The bottom of the cuff should be about 1 – 2 cm above your elbow
(thickness of your index or middle finger). Adjust the cuff around your arm so that the tubing runs down the centre
of your arm in line with your middle finger. 2. Secure the cuff around your arm using the cloth closure. 
Pull the cuff so that the top and bottom edges are tightened evenly around your arm.  3. Secure the cuff firmly 

but not too tight– just enough so that it is difficult to slide 2 fingers under the cuff.
This space is imperative for an accurate reading because this digital Blood Pressure Monitors use the
Oscillometric method of blood pressure measurement that detects your blood's movement through your
brachial artery and converts this movement into a digital reading.