ACT constantly exposes fresh biocide for continuous antifouling protection throughout the season

ACT is formulated with Ablative Copolymer Technology to provide a full season of antifouling protection. This ablative technology enables ACT to wear away with use, which eliminates the build-up of old spent coatings and the heavy sanding needed to remove them. ACT provides effective control of shell fouling such as barnacles and zebra mussels and it contains a Slime Fighter to control soft growth such as weed, slime and algae.

ACT is a great choice for single-season protection against moderate to heavy fouling in salt-, fresh-, and brackish water. For wood, steel and fiberglass hulls. Not for use on aluminum.

Key Features

• Provides single-season antifouling protection
• Eliminates paint build-up and heavy sanding 
• Compatible with most existing antifouling paints
• Slime fighter improves performance by reducing slime
• Use in all waters in salt, brackish and fresh water

Physical Data

• Type: Ablative 
• Finish: Matte 
• Available colors: Red, Blue, Black, Green
• Components: 1
• Curing mechanism: Solvent release
• Solids by Volume: 56%
• Coverage: 430sq. ft./gal.
• VOC: 370 grams/liter 
• Active ingredients: Cuprous oxide
• Additives: Biolux 

Application

• Application Method: Brush, roller, conventional spray, airless spray
• Number of coats recommended: 2-3 (3 on bare wood)
• Dry Film Thickness: 2 mils
• Wet Film Thickness: 3.6 mils wet
• Applicator: High-quality short nap roller (maximum 3/8” nap)
• Application temperature: Min./Max. Range: 50° F. Min/85°F. Max
• Thinner: Special Thinner 216, Model 117598 or Brush-Ease 433, Model 203679