Brand：JJC

Model：JM II

Product Type：Radio Frequency Wireless Shutter

Material：ABS+PCB+Brass

Brief Introduction：

JJC JM-II Series Radio Frequency Wireless Shutter is designed for most DSLR and SLR cameras that have a remote socket on the camera body. The system works at a 433MHZ frequency and has 16 available channels. What’s more, this wireless remote system adopts a technology to allow the transmitter trigger the receiver without direct line of sight up to 30 meters. The JM-II receiver simply attaches to a compatible camera's hot shoe, then just use the supplied cable to connect the receiver and the camera's remote socket. The receiver is powered by one piece of CR-2 lithium battery while the transmitter is powered by one piece of 23A battery. JM-II transmitter can trigger the camera shutter at five modes: single shot, 5 seconds delay shot, 3 continuous shots, unlimited continuous shots and bulb shot. The receiver has a 1/4"-20 tripod mount socket on the bottom, so you can even mount the receiver onto a tripod. Most important, our JM-II transmitter is able to fire multiple receivers at the same time. All these features make it good for eliminate camera shake in long exposure photography.

Transmitter is powered by one 23A battery while the receiver is powered by one CR2 battery.(Package already included)

Product type：433MHz Radio Frequency Wireless Shutter

Working distance ：Up to 30M

Channel：16

Cord Length：Stretchable to 60cm

Receiver weight：Approx × 19g

Receiver Size：48 × 38 × 29mm

Transmitter weight：Approx × 18g

Transmitter Size：82 × 27 × 14.7mm

Compatible with remote switch model:Fujifilm RR-80

For Fujifilm FinePix S100FS / FinePix S9000 / FinePix S9100 / FinePix S9500 / FinePix S9600 / FinePix IS-1 / S20 / FinePix S205EXR / FinePix S200EXR / FinePix HS20EXR FinePix HS22EXR / FinePix HS28EXR / FinePix HS25EXR / FinePix HS33EXR / FinePix HS30EXR / X-E1 / X-S1 / FinePix HS35EXR