You are bidding on a Brand New Southwest Speed Lake Style Header Kit with 3 1/2" Diameter Mega-Phone Collectors that features 3 1/2" Ceramic Hot Coated Turnouts & includes all necessary tubing required to build both the left side and the right side headers. This Header kit fits Small Block Chevy 265-400ci Engines (SWS Part #440-2303, 440-2983).

This Southwest Speed Lake Style Header Kit with 3 1/2" Ceramic Hot Coated Turnouts is great for Hot Rods, Street Rods, Rat Rods & Nostalgia Rods, and are hotter than ever & nothing gives your vintage rod that authentic dry lakes competition look like a set of lake style headers and now you can build them yourself and customize them to your vehicle. All tubing comes pre-bent with enough parts to complete both sides. Supplied with 22-1/2" tapered 1-5/8" to 3 1/2" mega-phones. The mega-phones are supplied un-cut, just the 1-5/8" inlet and 3 1/2" diameter outlets, to allow almost any configuration desired by cutting and welding tubes where the customer desires. Originally designed to blow across the salt flats of Bonneville, these exposed Small Block Chevy headers work great on rods without hoods, but are often used with side skirts trimmed up to fit around the headers. Running the turnouts delivers the true horsepower of the Small Block Chevy but each lake style header has a bottom exit flange so you can connect it to a muffled under-car exhaust. This will require unbolting the turnouts, & installing the endcaps. The Headers feature 1-5/8" primary tubes merging to the 3 1/2" collectors, & comes complete with header bolts and gaskets, reducer bolts and gaskets, and end cap bolts and gaskets. Supplied with precision cut 3/8" thick flanges to enhance the experience of assembling this quality header kit. Also includes the flanges and tubing to assemble a set of 2-1/2" connectors to complete the installation. The 3 1/2" Diameter Turnouts are supplied with precision cut 1/4" thick x 5 1/2" Diameter Flanges, complete with bolts and gaskets. Fits angle or straight plug heads, no spark plug or spark plug wire restrictions.

Note: We strongly suggest you refer to measurement chart below to insure headers will fit your vehicle and application, before ordering.

Kit Includes:

• New Southwest Speed Small Block Chevy Lake Style Header Kit (#440-2303)
  • 3/8" Precision cut head flanges
  • 1-5/8" pre-bent primary tubes
  • 1 5/8" to 3 1/2" mega-phones 22-1/2" long
  • 2-1/2" flanges and tubing to construct under car hook-up if desired
  • Removable end plates allow you to run open headers with ease
  • Great for Hot Rods, Street Rods, Rat Rods, & any Nostalgia Rod
  • More Performance
  • Better Mileage
  • Nice Choice to replace cast iron exhaust manifolds
  • Enhances the looks of any rod
  • Includes gaskets and mounting hardware
• New Southwest Speed 3 1/2" Ceramic Hot Coated Turnouts for Lake Style Headers (#440-2983)
  • Designed specifically for Southwest Speed Lake Style Headers
  • 3 1/2" Diameter Turnout
  • 1/4" Thick X 5" O.D. Flange
  • 4 X 4 1/4" Bolt Circle with 5/16" Bolt Holes
  • Includes gaskets and mounting hardware
  • Ceramic Hot Coated to resist early rust & corrosion

Applications:

• Fits all Small Block Chevrolet V-8 engines with standard exhaust pattern
• Fits 265-400 Cu. In. Standard, Vortec, and D-port ZZ-4 heads (not LT-1)

Welding Warning:

These header kits need to be assembled by someone who is proficient at fabricating and welding, they are not designed for amateur fabricators. These header kits must either be TIG Welded or MIG Welded. They are not designed to be Arc Welded or Stick Welded.

Ceramic Hot Coating Warning:

Warning: These Turnouts are Ceramic Hot Coated. CHC coatings will burn and be damaged at exhaust temperatures over 1300 degrees. A lean fuel mixture can generate exhaust temperatures exceeding 1700-1900 degrees. If the coating is damaged due to a lean condition, the coating will not be warranted, but can be recoated for a fee. No warranty or returns on Ceramic Hot Coated exhaust items once they have been installed.

Header Return Policy:

Please refer to the header measurement chart below to make sure the header will fit your vehicle and application before ordering. In the event you order a header that will not fit your vehicle and application, you may return them for a refund, providing you don't damage the header. When you receive the header the finish will be protected and must remain unscratched for a refund. If you bend or dimple any of the tubes or scratch the finish, we will not be able to sell the header and will not be able to process a refund. Use care when trial fitting headers. Repack them well to prevent damage returning them to us. We won't process refunds for scratched, dimpled, dented, or bent headers.

We also have these same header kits available in:

• 3 1/2" Painted Black Turnouts
• 4" Painted Black Turnouts
• 4" Ceramic Coated Turnouts

DRIVERS SIDE HEADER MEASUREMENT CHART

PASSENGER SIDE HEADER MEASUREMENT CHART

We also have thousands of other High Performance Parts in our store.

Shipping:

There is no faster shipping on Ebay. If you pay for the item by 5:00 Eastern, Monday-Friday, we will ship it the same day. If it's after 5:00 EST, we will ship it the next business day. If you pay for the item on the weekend, we will ship it out Monday.

Ebay now requires that sellers put a "handling time" on each item and "1 Business Day" is the shortest listed option. WE DON'T HAVE A HANDLING TIME. We ship same day in accordance with the paragraph above. No delays here. We want you to have the parts as bad as you do.

Shipping cost will be $29.99 within the continental United States. If you buy 2 or more of our auctions, shipping will certainly be combined to save you money. We will be glad to ship internationally. Just send me a message for an international shipping quote.

Accepted payment methods:

We accept Paypal. If buyer doesn’t have a Paypal account, he or she can pay with Visa, Mastercard, or Discover through seller’s merchant account.