Description |
---|
The PLANET FGSW-2402VS offers 24 10/100Mbps Fast Ethernet ports with 2 open slots (port25, 26). The two open slots can be installed by optionally two of 10/100Base-TX port, 1000Base-T port, 100Base-FX, or 1000Base-SX/LX fiber-optic interfaces. The distance can be extended from 100 meters (TP), 2 kilometers (Multi-mode, ST or SC), up to 15 kilometers (Single-mode, SC).
Equipped with non-blocking 8.8Gbps backplane greatly simplifies the tasks of upgrading your LAN to cater for increased bandwidth demands.
For efficient management, the FGSW-2402VS Web Smart Switch is equipped with console and Web interface. The FGSW-2402VS Web Smart Switch can be programmed for basic switch management functions such as port speed configuration, Port Trunking, VLAN, Port Mirroring, QoS, bandwidth control, and Misc Configuration.
The FGSW-2402VS provides port-based VLAN (including overlapping). The VLAN groups allowed on the FGSW-2402VS will be maximally up to 26 for port-based VLAN. Via supporting port trunking, the FGSW-2402VS allows the operation of a high-speed trunk combining multiple ports. The FGSW-2402VS provides seven groups of up to 4-ports for trunking, and it supports fail-over as well. |
|
|
Product Application |
---|
Workgroup Switch | | With 24 10/100Mbps ports and up to 2 optional copper or fiber ports, the FGSW-2402VS provide a cost-effective, high-performance solution for power users. |
| | Department Switch | | With its 8.8 Gigabits per second, non-blocking switch fabric, the FGSW-2402VS can easily provide a local, high bandwidth, Fast Ethernet network for your departmental backbone. With the two open slots, the FGSW-2402VS provides the uplink to the backbone network through either Fast Ethernet fiber-optic or Gigabit Ethernet SX/LX modules. |
| | MTU Switch | | In an MTU/MDU application, the advanced functionality of the FGSW-2402VS eliminates traditional problems associated with Ethernet. Using the built-in VLAN functionality can segregate users. This coupled with the flexible fiber module options makes the FGSW-2402VS one of the best and most cost-effective switch solutions for multi-tenant service providers. |
| |
|
|
Key Features |
---|
| • Complies with the IEEE802.3, IEEE802.3u, IEEE802.3z and IEEE802.3ab Gigabit Ethernet standard • 24-port 10/100 Mbps Fast Ethernet Switch • 2 open slots for 10/100Base-TX, 1000Base-T and 100Base-FX, 1000Base-SX/LX fiber-optic interface with various connection media and distances • Each Switching ports support auto-negotiation-10/20, 100/200Mbps supported • Auto-MDI/MDI-X detection on each RJ-45 port • Prevents packet loss with back pressure (half-duplex) and 802.3x PAUSE frame flow control (full- duplex) • High performance Store and Forward architecture,broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth • 6K MAC address table, automatic source address learning and ageing • 4Mbit embedded memory for packet buffers • Console and Web interface for Switch basic management and setup • Support up to 26 port-based VLAN groups • Support up to 7 Trunk groups, each trunk for up to maximum 4 port with 800Mbps bandwidth • Port mirroring allows monitoring of the traffic across any port in real time • Support QoS and bandwidth control on each port | |
|
|
SPECIFICATIONS |
---|
| Hardware Specification | Ports | 24 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports | Module Slot | 2 open slots for 10/100Base-TX, 1000Base-T and 100Base-FX, 1000Base-SX/LX fiber-optic interface | Switch Processing Scheme | Store-and-forward | Address Table | 6K entries | Share data Buffer | 4Mbit | Throughput (packet per second) | 6.547Mpps | Switch fabric | 8.8Gbps | Flow Control | Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex | Dimensions | 440 x 200 x 44 mm, 1U height | Weight | 2.6 kg | Power Requirement | 100~240 VAC, 50-60 Hz | Power Consumption / Dissipation | 30 Watts maximum / 102 BTU/hr maximum | Temperature | Operating: 0~50°C, Storage -40~70°C | Humidity Operating | 10% to 90%, Storage: 5% to 90% (Non-condensing) | Smart function | System Configuration | Console port and Web interface | Port Configuration | Port disable/enable Auto-negotiation disable/enable. 10/100Mbps full and half duplex mode selection Flow control disable/enable | Port Status | Display each port's disable/enable status, each port's link status, and speed duplex mode. Flow control status | Port Trunking | Support 7 groups of 4-port trunk support | VLAN | Maximum up to 26 VLAN groups for port-based VLAN | Port Mirroring | 1 Mirroring port to monitor several mirrored ports. The monitor modes are Disable, RX, TX, TX& RX | QoS | Allow to assign low and high priority on each port | Bandwidth Control | Allow to assign rate control on each port | Standards Conformance | Regulation Compliance | FCC Part 15 Class A, CE | Standards Compliance | IEEE 802.3 (Ethernet) IEEE 802.3u (Fast Ethernet) IEEE 802.3z(Gigabit Ethernet) IEEE 802.3ab (Gigabit Ethernet) IEEE 802.3x (Flow control) IEEE 802.1p QoS |
|
|