Features:
- Folds back to within 90mm of the wall
- Extends up to 445mm from the wall
- Pivot/Swivel: up to 45 degrees each way (left / right)
- Forward Tilt: 0 to 12 degrees
- Suits Australian studs 600mm / 450mm
- Also suitable for brick / concrete walls
- Smaller model suits screens up to 35kg and approx 32-55"
- Larger model suits screens up to 45kg and approx 42-70" 

For Australian Homes
If mounting on plasterboard walls it is essential that this bracket (like all brackets) is fixed to timber studs. This bracket is designed to be compatible with Australian standard 600mm stud spacings and 450mm stud spacings. Note that many other brackets on the market are unable to span the more common 600mm studs. This bracket can also be mounted on brick or concrete walls. 

Screws / Bolts
This bracket includes a variety of screws/bolts which are suitable for most installations. Unfortunately, due to the enormous range of TV brands and models available, we're unable to guarantee that the included fixings will suit every installation.

Low Profile "Slimline" Design
Most of the other brackets which can tilt forwards and also pivot/swivel left and right are quite bulky and can't fold up very compactly, making it difficult to position your TV close to the wall. This bracket doesn't have that problem: it can fold back to within 90mm of the wall. Please note however that many manufacturers recommend that LCDs and plasmas are not to be mounted within a certain distance from the wall (refer to your TV's user manual), due to heat and ventilation concerns.

Horizontal Swivel/Pivot (Left/Right)
This bracket allows you to swivel/pivot your TV up to approximately 45 degrees to the left and right. Please note that larger TVs may be limited to an angle smaller than 45 degrees.

Vertical Tilt (Up/Down)
This bracket allows you to position your TV flat against the wall, or tilt it forwards to a maximum of approximately 12 degrees. 

Will it fit my screen?
This listing gives you the choice of two brackets: one for approx 32-55 inch screens and one for approx 42-70 inch screens.

The smaller bracket will fit your TV (and not be visible from front on) if your TV is:
- At least 700mm wide and at least 425mm tall, for the smaller bracket.
- At least 890mm wide and at least 425mm tall, for the larger bracket. 

The four threaded mounting holes on the back of your TV need to be:
- No more than 600mm apart side to side and no more than 400mm apart top-to-bottom, for the smaller bracket.
- No more than 890mm apart side-to-side and no more than 400mm apart top-to-bottom, for the larger bracket.

Maximum TV weight capacity is 35kg (smaller bracket) or 45kg (larger bracket).

Specifications (general):
- Horizontal Pivot/Swivel: -45 to +45 degrees
- Forward Tilt: 0 to 12 degrees
- Distance from wall: 90mm to 445mm
- Compatible stud spacings: 450mm / 600mm
- Also suits brick / concrete walls

Specifications (32-55 inch):
- Maximum weight capacity: 35kg
- Total width of bracket: 694mm
- Total height of bracket: 400mm
- Maximum mounting hole spacing (horizontal): 600mm
- Maximum mounting hole spacing (vertical): 400mm
- Suits VESA standards up to 600x400mm

Specifications (42-70 inch):
- Maximum weight capacity: 45kg
- Total width of bracket: 884mm
- Total height of bracket: 420mm
- Maximum mounting hole spacing (horizontal): 800mm
- Maximum mounting hole spacing (vertical): 400mm
- Suits VESA standards up to 800x400mm