The DuroMax XP16HP is the top of the line powerhouse engine available from DuroMax. It features a 420cc - 4 Stroke Overhead Valve design Engine that has a E-Z Pull Recoil Start. It can cranks out capable of 23.34-Ft/Lbs of Torque. The Shaft is 1” in diameter and 2.75” long, while the end is 3/8” size UNF size 24 Drill and Tapped. Feeding this monster engine is a 1.75 gallon Fuel Tank which at half load can run over 3 hours on a single tank of fuel. The operating Fuel is standard 87 Octane or better Gasoline. It is also EPA and CARB approved for safe use in mandated areas. This Engine can handle everything you can throw at it, whether being used for log splitters, water transfer pumps, or custom go-karts, the DuroMax line of engines will deliver power when you need it.
Specifications | |
---|---|
Brand | DuroMax Power Equipment |
SKU | XP16HP |
Engine Type | 4-Stroke |
Valve Type | OHV |
Engine Cooling Type | Forced Air |
Displacement | 420cc |
Bore | 90mm |
Stroke | 66mm |
Max Output | 3600 RPM |
Max Torque | 28.5 Nm / 23.34 ft/lb. |
Compression Ratio | 8.8:1 |
Shaft Orientation | Horizontal |
Shaft Size | 1" Diameter, 3.48" Long, 1/4" x 2.2" Keyway |
Shaft End | 3/8" Size 24 UNF - Drilled and Tapped |
Shaft Rotation | Counter Clockwise |
Measurement from Center of Shaft to Base | 5" |
Fuel Tank Capacity | 1.75 Gallons |
Fuel Types | 87+ Octane Gasoline |
Fuel Delivery System | Carburetor |
Average Run Time | 1/2 Gallon Per Hour (at 1/2 load) |
Starting Type | Recoil |
Recoil Start | Yes |
Cast Iron Sleeve | Yes |
Bearing Type | Stainless Steel Ball Bearing |
Oil Cooling Type | Splash |
Oil Capacity | 37.2 fluid oz. |
Recommended Oil | 10W-30 |
Recommended Oil Types | Blended, Conventional, or Synthetic |
Product Dimensions | 18"-Long x 16.5"-Wide x 17.7"-High |
Product Weight | 68-lbs |
UPC | 891784001105 |
Warranty | 3 Year |
EPA Certified | Yes |
CARB Certified | Yes |
50 State Emissions | Yes |