A Set of 16 Good Quality Closed End Chromed Replacement Wheel Nuts

Please Note these are a high Quality nut of Solid Design there is no Pressed Steel Cover to Fall Off!! Still 19mm OE Socket Size

Fit All the following Jaguar Models With Original Factory Fitted Alloy Wheels

Jaguar F Type from 2013 onwards

Jaguar S Type from 1999 to 2008

Jaguar X Type from 2001 to 2009

Jaguar XF Series from 2009 onwards

Jaguar XJ (X350) from 2004 to 2007

Jaguar XJ (X351) from 2009 onwards

Jaguar XJ (X358) from 2007 to 2009

Jaguar XK / XKR Series from 2007 to 2014

This ad is for a set of 16 nuts

Technical Specification

Chrome Plated Sleeved Nut 12x1.5mm Thread, Closed end, Flat seated with captive flat washer & Uses a (19mm OE SIZE) Socket/Wrench, manufactured to OE (original equipment) specification.

Important Information

Always compare the seating and thread with the original equipment fitted, The Manufacturer Strongly recommends that each installation should be inspected during fitment and thoroughly checked after fitment (by spinning the wheel if necessary) after 200 miles or 300km use. Torque settings should be in accordance with vehicle manufacturers recommendations. If you are unsure about any aspect of fitting do not attempt to fit but contact your local dealer. Your wheel hubs or brakes may be adversely affected by wrongly fitted wheel nuts. Do not use air guns to fit.

Fitment: If no choices are shown in the compatibility "Notes" field then this product should be correct for the vehicle you have selected. If you need any help please contact us through the "contact seller" tab, please include your vehicle registration number and the parts you require, we can then send you links to the correct items for your vehicle.

 

Legal Information & Product Fitment – All data in this ad is taken via third party databases, the company makes every effort to ensure the listings are accurate but responsibility will not be accepted for errors or omissions with-in the listings. You should always check the product being fitted against the part being removed and check that they are of the same specification, if you are unsure you should consult your vehicle dealership for advice. “The Company” cannot be held responsible for any consequential loss or damage caused by the incorrect fitting of a part or fitting a part that is not suitable for the vehicle application – If you are unsure you should always seek the advice and opinion of a qualified vehicle mechanic.  Any purchase made through this ad constitutes the acceptance of these terms and conditions.