Please read the description carefully & fully, if in doubt just. We'll work with you to make sure you get what you need. Price is for one adapter, not a set. One end is a fraction under 32mm OD to insert into a generic 32mm ID vacuum hose, if your hose has a plastic cuff or nozzle fitted then you will need to check that the ID is 32mm before ordering. The other end is selected from the list when purchasing and is the OD on the adapter, eg when ordering a 32mm OD to 45mm OD adapter you will receive an adapter with one end 32mm OD and one 45mm OD.

Designed for the small/home workshop these adapters enable the use of generic 32mm ID vacuum hose. 3D printed from PLA, a biodegradable plant based thermoplastic polymer, these are tough whilst offering a certain degree of fitting flexibility.

There is a range of sizes that will suit most bench & hand power tools with the 32mm OD to 32mm OD adapter also useful for connecting 2 hoses together. Also available is a 90 degree bend, useful for changing the direction of the hose in tight spaces and where the hoses current location obstructs the users view in use. There is also a 'Y' splitter to facilitate 2 extract points from the one hose for applications requiring dual extraction such as a mitre saws, router tables and table saws. Both of these have one end sized to suit the 'hose' end of our tool adapters with the other ends sized to insert into a 32mm ID hose. They can however have any combination of fitment i.e. 32mm ID insert &/or 32mm OD spigot. Just put a note on the order with your requirements. Pic 8 shows these, with pics 9 & 10 showing exmaples in use. Finally we have a stop end or bung should you need to cap off a hose in use.

Sizing & Fit Adjustment

These are sized to cover as many tools/uses as possible but due to the variations & tolerances in manufacturing techniques and between tools there is no 'one size fits all solution'. We highly recommend that you take your own dust port measurements, ideally using a vernier, rather than relying on manufacturers printed data. Sized for a snug friction insert fit these can be sanded back a small amount should you need to reduce the diameter. For oversized ports you can of course add a gasket by means of an appropriate tape. Sizes are +/- 1% & are OD unless stated ID.

Our expanding range includes adapters for 32mm, 38mm, 50mm, 65mm flexible hoses as well as adapters to connect hoses to 68mm rainwater pipe & 50mm uPVC waste pipe, adapters for a 50mm dust cyclone & lastly for the Trend CRT/MK3 router table. Please see our other listings if you can't find what you require here.

We do offer a custom option so should you have a specific diameter requirement please message us with your details, stating the make/model of the tool plus the relevant ID's & OD's & we will let you know what we can do.

Stock & Postage

Stock is added daily, please check back or send a message if any sizes are showing out of stock. Price is for 1no adapter size, not a set, no other items shown in any pictures are included. All orders will be dispatched in one parcel regardless of the number of individual orders placed & one tracking number supplied.