ZB100901

Spercification:

Name: Automatic aerosol dispenser

Material: ABS plastic

Power: 2 * D size battery (product not included, you need to buy it yourself)

Capacity: 300ml Can Air Freshener (product not included, you need to buy it yourself)

Iterm size: about 8.3cm * 8.3cm * 23.7cm

Net weight: 402.5 grams

White color

Feature:

1 from Monday to Friday

2 from Monday to Saturday

3 from Monday to Sunday

2. You can set the start and stop time at will.

3. The spraying interval can vary from 1 minute to 60 minutes.

4. You can check the number of sprays.

5. Built-in LCD clock display time.

Package:

1 *Automatic aerosol dispenser

1 * User Manual

1 *screw

1 * screw plug

Installation:
The dispenser should be placed 7-9 feet above the ground to ensure effectiveness and safety.
1. Place the dispenser in the location to be installed and mark it on the wall.
2. Drill holes in the mark on the wall, then insert the anchor and mounting screws, leaving a space of about 4 mm for easy removal of the device to replace the battery or refill the air freshener.
3. Make sure the dispenser is securely mounted to the wall.
Note: Do not aim the nozzle at the face to avoid being sprayed on your eyes.
Instructions
1. Install the battery.
2. Press the ON/OFF button once, the corresponding position of the display is displayed as ON;
3, install the perfume, the spray port should not be aligned with the face, press SPRAY once, the indicator light flashes alternately red and green, spray once after three seconds, test whether the injection function is normal;
4. After the injection function test is completed, press the MODE button for 2 seconds, the LCD will show this with START. This is the day start injection time point setting, press HOUR, MIN button to set the time;
5. After setting the START time, press the MODE button once, the display shows STOP. This is the one day stop injection time point setting, press HOUR, MIN key to set the time;
6. After setting the STOP time, continue to press the MODE button once. The display shows SPRAY. This is the total number of times the aerosol dispenser is injected. This is a recording function. It returns to zero after RESET.
7. Continue to press the MODE button once. The display shows INTERVAL. This is the injection time interval setting. Press the MIN button to set the time. It can be set at any interval of 1-60 minutes.
8. After the time interval setting is completed, continue to press the MODE button once. The display shows WEEK. This is to set the number of days of jetting a week. Press WEEK to adjust. You can set three modes: Week 1-5, Week 1-6 Week 1-7.
9. Finally press the MODE button once, the display shows CLOCK, this is the clock function, showing the actual time, press the HOURMINWEEK button to adjust the time, after the setting is completed, press the MODE button once more to complete the setup!
10. When the low battery symbol in the lower left corner of the LCD screen flashes, it indicates that the battery is low, you need to replace the new battery. After replacing the battery each time, if the battery is turned off, you can replace the battery within one minute. Good parameters do not need to be reset, otherwise, they need to be reset.