Product Description
HDMI+DVI+VGA+Audio Controller Board for 23" 1920x1080 LCD LM230WF5-TLF1 -TLF2 -TLG1
---The power adapter for the board + 23" LCD is DC+12V 5.0A~8.0A. ---12V DC Adapter(with 5.5x2.5 male connector. The plug of the power cord is American standard): https://www.ebay.com/itm/402313739186 |
---Programmer for upgrading the firmware of this controller board: https://www.ebay.com/itm/402265558558 |
For LM230WF5 , the backlight interface has the 3 types according to the different suffix: | ||
Model: | FFC/FPC: 05010HR-06D |
|
Pitch: | 0.5mm | |
LCD Model: | LM230WF5-TLA1 | |
LM230WF5-TLA3 | ||
LM230WF5-TLB1 | ||
LM230WF5-TLC1 | ||
LM230WF5-TLC2 | ||
Model: | FFC/FPC: 10019HR-H06B |
|
Pitch: | 1.0mm | |
LCD Model: | LM230WF5-TLD1 | |
LM230WF5-TLD2 | ||
LM230WF5-TLD3 | ||
LM230WF5-TLD5 | ||
LM230WF5-TLE1 | ||
Model: | Wire to Board: SM06B-SHJH(HF) |
|
Pitch: | 1.0mm | |
LCD Model: | LM230WF5-TLF1 | |
LM230WF5-TLF2 | ||
LM230WF5-TLF4 | ||
LM230WF5-TLF5 | ||
LM230WF5-TLH1 | ||
LM230WF5-TLG1 |
The LCD's connector is Wire to Board type, pin pitch 1.0mm, 30Pin. The backlight connecotr is SM06B-SHJH(HF)(Wire to Board type), pin pitch 1.0mm, pin amount 6 pins(CNAANC). |
|||
LM230WF5-TLF1 | |||
LM230WF5-TLF2 | |||
LM230WF5-TLF4 | |||
LM230WF5-TLF5 | |||
LM230WF5-TLG1 | |||
LM230WF5-TLH1 | |||
---The power for the board+LCD and the screen's voltage are 2 different parameters. ---Normally, the board works at DC+12V3.0A~8.0A. ---The screen's voltage only can be supplied by the board's jumper. Normally, there are 3 kinds of voltages for the LCD: +3.3V +5.0V +12.0V. The jumper has been set at +5.0V for this listing LCD. Please don't jump it again. Or else, LCD will be damaged at 12.0V . |
Kind Note: |
---The driver board can be worked with lots of lcd with different resolution after upgrading the firmware,such as: ......800 x480 ......800 x600 ......1024x768 ......1280x800 ......1280x1024 ......1366x768 ......1440x900 ......1600x900 ......1920x1080 ......1920x1200 ......up to 2048x1154@60Hz |
Package includes: |
|
---1× HDMI VGA DVI LCD Controller Board M.NT68676 ---1× Keyboard with Wire ---1× Backlight Cable ---1× LVDS Cable(FI-XB30SSRL-HF16, 2 ch 8-bit, pin pitch 1.0mm, pin amount 30pins) ---1× LED Inverter Board |