Product Description
HDMI+DVI+VGA+Audio Control Board for 17.0inch 1280x1024 LCD Panel with 4-Lamp CCFL backlight
---The power adapter for the board is DC+12V 3.0A~5.0A. ---12V DC Adapter(with 5.5x2.5 male connector. The plug of the power cord is American standard): https://www.ebay.com/itm/402243169332 |
---Programmer for upgrading the firmware of this controller board of LVDS LCD: https://www.ebay.com/itm/402265558558 |
This listing item can be fit for the following 17.0inch 1280x1024 LCD. The LCD's backlight interface is BHSR-02VS-1 (Wire to Board type ), 4pcs connector. each connector: pin pitch 3.5mm, pin amount 2Pin. | |||
HSD170ME13-A -A04 -A06 -A07 | LM170E01 | M170EG01 V.0 V.1 V.2 V.3 V.5 V.6 V.7 V.8 V.9 | M170EN07 V.1 |
LM170E02-A5 | M170EG01 V.A V.B V.C V.D | ||
G170EG01 V.0 | LM170E03-TLC1 -TLG1 -TLG2 -TLG3 -TLG4 -TLGD -TLL2 -TLB1 -TLB2 -TLB3 -TLL1 -TLL3 -TLL4 | ||
M170EG02 V.3 V.6 | |||
LQ170E1LG11 | |||
LQ170E1LG18 | |||
LQ170E1LG41 | |||
LT170E4-L01 | |||
LTM170EX-L01 -L02 -L21 -L31 | |||
LTM170EU-L01 -L11 -L21 -L25 -L31 -L32 -L35 | |||
LTM170EH-L01 -L05 | |||
LTM170E5-L01 -L03 | |||
LTM170E6-L02 -L03 -L04 | |||
LTM170E8-L01 -L02 -L03 -L21 | |||
---The power for the board+LCD and the screen's voltage are 2 different parameters. ---Normally, the board works at DC+12V3.0A~8.0A. ---The screen's voltage only can be supplied by the board's jumper. Normally, there are 3 kinds of voltages for the LCD: +3.3V +5.0V +12.0V. The jumper has been set at +5V for this listing LCD. Please don't jump it again. Or else, LCD will be damaged at +12.0V . |
Kind Note: |
---The driver board can be worked with lots of lcd with different resolution after upgrading the firmware,such as: ......800 x480 ......800 x600 ......1024x768 ......1280x800 ......1280x1024 ......1366x768 ......1440x900 ......1600x900 ......1920x1080 ......1920x1200 ......up to 2048x1154@60Hz |
Package includes: |
|
---1× HDMI VGA DVI LCD Controller Board M.NT68676 ---1× Keyboard with Wire ---1× LVDS Cable(FIX 30P 2ch 8-bit) ---1× 4-Lamp CCFL Inverter Board |