Product Description
HDMI+DVI+VGA+Audio Control Board for 1280x1024 LQ170E1LG21 LQ190E1LW61 LED backlight
---The power adapter for the board is DC+12V 3.0A~5.0A. ---12V DC Adapter(with 5.5x2.5 male connector. The plug of the power cord is American standard): https://www.ebay.com/itm/402243169332 |
---Programmer for upgrading the firmware of this controller board: https://www.ebay.com/itm/402265558558 |
The item can be fit for 19inch 1280x1024 LCD. The LCD's connector is Wire to Board type, pin pitch 1.0mm, pin amount 30 Pins. The backlight connecotr is SM10B-SHLS-TF(Wire to Board type), pin pitch 1.0mm, pin amount 10 Pins |
|||
LQ170E1LG21 | LQ190E1LW61 | LQ190E1LX75 | LQ190E1LX7A |
LQ190E1LW72 | |||
LQ190E1LW76 | |||
---The power for the board+LCD and the screen's voltage are 2 different parameters. ---Normally, the board works at DC+12V3.0A~8.0A. ---The screen's voltage only can be supplied by the board's jumper. Normally, there are 3 kinds of voltages for the LCD: +3.3V +5.0V +12.0V. The jumper has been set at +5V for this listing LCD. Please don't jump it again. Or else, LCD will be damaged at +12.0V . |
Kind Note: |
---The driver board can be worked with lots of lcd with different resolution after upgrading the firmware,such as: ......800 x480 ......800 x600 ......1024x768 ......1280x800 ......1280x1024 ......1366x768 ......1440x900 ......1600x900 ......1920x1080 ......1920x1200 ......up to 2048x1154@60Hz |
Package includes: |
|
---1× HDMI VGA DVI LCD Controller Board M.NT68676 ---1× Keyboard with Wire ---1× LVDS Cable(FIX 30P 2ch 8-bit) ---1× Backlight Cable |