Features:
* This is a great 400W DC to DC step-up power supply module for electric equipment, digital products, laptop, etc.
* Input and output are designed with screw terminals for convenient wire connection and disconnection.
* High efficiency, the maximum conversion efficiency can be 96% and efficiency is related to input/output voltage, current and voltage difference.
* There are 2 heat sinks that would ensure a better heat dissipation.
* It can also be used as a driver for high power LED lights or voltage regulator for solar panels.
* This is a great 400W DC to DC step-up power supply module for electric equipment, digital products, laptop, etc.
* Input and output are designed with screw terminals for convenient wire connection and disconnection.
* High efficiency, the maximum conversion efficiency can be 96% and efficiency is related to input/output voltage, current and voltage difference.
* There are 2 heat sinks that would ensure a better heat dissipation.
* It can also be used as a driver for high power LED lights or voltage regulator for solar panels.
Specification:
* Type :400W boost constant current module
* Module properties: non-isolated step-up module (BOOST)
* Input voltage: DC8.5V-50V
* Input current: 15A (MAX) exceeds 8A please enhance heat dissipation
* Quiescent current: 10mA (12V liter 20V, the output voltage, the higher the current will increase too quiet)
* Output voltage: 10-60V continuously adjustable
* Constant range: 0.2-12A
* Temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation)
* Operating frequency: 150KHz
* Conversion efficiency: up to 96%
* Overcurrent protection: yes
* Input reverse polarity protection: no
* Installation: 4 2.55mm screw holes
* Connection method: Connection Output
* Module size: 67mm X48mm X 28mm
Applications:
1. Be used as a regulated power supply.
2. Power your electronic device and set the output value according to your system voltage.
3. Power your laptop, PDA or a variety of digital products as a car power supply.
4. Be used as a high-power notebook mobile power with a large-capacity 12V lithium battery pack.
5. Solar panel voltage regulator.
6. Charge the battery, lithium battery, etc.
7. Drive high-power LED lights.
* Type :400W boost constant current module
* Module properties: non-isolated step-up module (BOOST)
* Input voltage: DC8.5V-50V
* Input current: 15A (MAX) exceeds 8A please enhance heat dissipation
* Quiescent current: 10mA (12V liter 20V, the output voltage, the higher the current will increase too quiet)
* Output voltage: 10-60V continuously adjustable
* Constant range: 0.2-12A
* Temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation)
* Operating frequency: 150KHz
* Conversion efficiency: up to 96%
* Overcurrent protection: yes
* Input reverse polarity protection: no
* Installation: 4 2.55mm screw holes
* Connection method: Connection Output
* Module size: 67mm X48mm X 28mm
Applications:
1. Be used as a regulated power supply.
2. Power your electronic device and set the output value according to your system voltage.
3. Power your laptop, PDA or a variety of digital products as a car power supply.
4. Be used as a high-power notebook mobile power with a large-capacity 12V lithium battery pack.
5. Solar panel voltage regulator.
6. Charge the battery, lithium battery, etc.
7. Drive high-power LED lights.
Output Voltage/Current Adjustment:
1. Adjust "CV-ADJ" potentiometer clockwise to reduce voltage, counterclockwise to increase voltage.
2. Adjust "CC-ADJ" potentiometer counterclockwise about 30 circles to minimize the output current before connecting to load(clockwise to increase current, counterclockwise to reduce current). Then adjust "CC-ADJ" clockwise to the current value you need. If you use the module for battery charging, connect to output after battery is fully discharged. Because if the more energy is left in battery, the less charging current will be.
1. Adjust "CV-ADJ" potentiometer clockwise to reduce voltage, counterclockwise to increase voltage.
2. Adjust "CC-ADJ" potentiometer counterclockwise about 30 circles to minimize the output current before connecting to load(clockwise to increase current, counterclockwise to reduce current). Then adjust "CC-ADJ" clockwise to the current value you need. If you use the module for battery charging, connect to output after battery is fully discharged. Because if the more energy is left in battery, the less charging current will be.
Package included:
1 x Module
1 x Module
Note:
1. Manual measured, please allow 1-2cm error
2. Due to computers display colors differently,the color may vary slightly from the above images,Thanks for your understanding!
1. Manual measured, please allow 1-2cm error
2. Due to computers display colors differently,the color may vary slightly from the above images,Thanks for your understanding!
3. If you have any questions, please feel free to contact us, we will reply as soon as possible and help you solve!
Shpping
1.Thanks for shopping from us!
2. Please pay attention to the mail.
3. When you satisfied with our product and service, please leave up positive feedback.
4. If a problem occurs,contact us immediately with any email request.
5. Please give us the opportunity to resolve any problems with your order.
6. If you send email to us, In our working hours will be resumed within 48 Hours.
1.Thanks for shopping from us!
2. Please pay attention to the mail.
3. When you satisfied with our product and service, please leave up positive feedback.
4. If a problem occurs,contact us immediately with any email request.
5. Please give us the opportunity to resolve any problems with your order.
6. If you send email to us, In our working hours will be resumed within 48 Hours.