Thrustmaster Steering Wheel Adapter(TX, T300, T500, TS-XW, TS-PC). Condition is New. Dispatched with Royal Mail Tracked 48.

This adapter fits the following Thrustmaster Racing Wheel Bases: TX, T300, T500, TS-XW, TS-PC, T-GT. Any Thrustmaster wheel base that has the screw collar.

I have now changed my design so that one adapter fits 70mm and 74mm wheels

Please make sure this adapter will fit your steering wheel:

• The 70mm bolt pattern will fit steering wheels such as Sparco, OMP, MOMO, NRG, VERTEX
• The 74mm bolt pattern will fit steering wheels such as Nardi, Personal

Please see picture below on how these measurements are made.

The quick release ring makes it easier to spin the collar around the adapter or wheel.

Adapters come with:

• 1x Steering Wheel Adapter
• 6x M5 Nuts (M5 bolts not included as they usually come with the steering wheel)

Adapters do not come with connectors

Connectors now more closely match the original wheel connectors and therefore could be used in an official Thrustmaster wheel if necessary. The flat side of the flange points outwards with the thin wall part going into the adapter or original wheel. The pieces have L and R on the top to show which side they should be on. It is a little fiddly to put the connector in.

Connectors are comprised of:

• 1x 6-Pin Mini DIN Plug Connector
• 2x M2.3x10 self tapping screws (Almost identical to original)
• ~7-8cm wiring

The adapter is printed with 6 walls and 40% infill in black PETG. If you don't know what this means, don't worry, this means that this adapter should stand all the normal use on your wheel. If you ever happen to break an adapter, please contact me. I have been using a 3D printed adapter for drifting with a 330mm wheel on a TX base for almost 2 years, and only recently put a new adapter on to keep up to date with what I'm selling.

If you want to use the connector and make your own buttons, you will need something to emulate how the steering wheel works. This can be done with a custom circuit board or with an Arduino. If you message me, I can provide a link to a blog post by Taras Ivaniukovich about using an Arduino to achieve this.

Shipping in UK with Royal Mail Tracked 48. International shipping with Global Shipping Program.