Product Description
Notes: Universal Joint -- Premium; with Steel Driveshaft & Steel Driveshaft Yoke; Non-Greasable Super Strength U-Joint
Features:- Needle bearings and snap rings from an original equipment supplier
- Consistent heat treatment achieves good bearing hardness for durable wear and strength
- Cross forging shape and flash provide easier installation and high strength
- Greaseable - allows new grease to flush out contamination and moisture reducing corrosion and wear
- Nitrile rubber grease seals have compressed double lip design for protection from contaminants
- Bearing cups ground and slightly oversized to fit in a used drive shaft
Product Specifications
Detailed Applications
Years | Vehicle |
---|
Fitment Notes: with 2 Joint Driveshaft |
Position: At Transmission |
1975-1978, 1980-1986 | Ford E250 Econoline Club Wagon |
Years | Vehicle |
---|
Fitment Notes: with 3 Joint Driveshaft |
Position: At Rear Axle |
1975-1978 | Ford E250 Econoline Club Wagon |
Years | Vehicle | Transmission |
---|
Fitment Notes: with 3 Joint Driveshaft |
Position: At Transmission |
1984 | Ford E250 Econoline Club Wagon | Automatic |
1975-1978, 1980-1983, 1985-1986 | Ford E250 Econoline Club Wagon | |
Years | Vehicle | Transmission |
---|
Fitment Notes: with 3 Joint Driveshaft |
Position: At Center Bearing |
1984 | Ford E250 Econoline Club Wagon | Manual |
1984 | Ford E250 Econoline Club Wagon | Automatic |
1975-1978, 1980-1983, 1985-1986 | Ford E250 Econoline Club Wagon | |
Years | Vehicle |
---|
Fitment Notes: with 2 Joint Driveshaft |
Position: At Rear Axle |
1975-1978 | Ford E250 Econoline Club Wagon |
Years | Vehicle |
---|
Fitment Notes: with 1-1/16in Bearing O.D.; with 3 Joint Driveshaft |
Position: At Transmission |
1979 | Ford E250 Econoline Club Wagon |
Years | Vehicle |
---|
Fitment Notes: with 1-1/16in Bearing O.D.; with 2 Joint Driveshaft |
Position: At Transmission |
1979 | Ford E250 Econoline Club Wagon |
Years | Vehicle |
---|
Fitment Notes: with 1-1/16in Bearing O.D.; with 3 Joint Driveshaft |
Position: At Center Bearing |
1979 | Ford E250 Econoline Club Wagon |
Years | Vehicle | Engine | Transmission |
---|
Position: At Transmission |
1991 | Ford E250 Econoline Club Wagon | 4.9L 6 Cyl | |
1990-1991 | Ford E250 Econoline Club Wagon | 7.5L V8 | |
1990-1991 | Ford E250 Econoline Club Wagon | 7.3L V8 | |
1990 | Ford E250 Econoline Club Wagon | 4.9L 6 Cyl | Automatic 3 Spd |
1987-1989 | Ford E250 Econoline Club Wagon | | |
Years | Vehicle |
---|
Fitment Notes: Not Using U-Bolts |
Position: At Rear Axle |
1989 | Ford E250 Econoline Club Wagon |
Years | Vehicle | Engine | Transmission |
---|
Fitment Notes: with 3.73 Rear Axle Ratio |
Position: At Transmission |
1990 | Ford E250 Econoline Club Wagon | 4.9L 6 Cyl | Automatic 3 Spd |
Years | Vehicle | Engine | Transmission |
---|
Fitment Notes: with 4 Inside Lock Rings; Except 4.10 Rear Axle Ratio |
Position: At Rear Axle |
1990-1991 | Ford E250 Econoline Club Wagon | 5.8L V8 | Automatic 3 Spd |
1990 | Ford E250 Econoline Club Wagon | 4.9L 6 Cyl | Automatic 3 Spd |
Years | Vehicle | Engine | Transmission |
---|
Fitment Notes: Except 4.10 Rear Axle Ratio |
Position: At Transmission |
1990-1991 | Ford E250 Econoline Club Wagon | 5.8L V8 | Automatic 3 Spd |
1990 | Ford E250 Econoline Club Wagon | 4.9L 6 Cyl | Automatic 3 Spd |
Years | Vehicle | Engine | Transmission |
---|
Fitment Notes: Except 4.10 Rear Axle Ratio |
Position: At Center Bearing |
1990-1991 | Ford E250 Econoline Club Wagon | 5.8L V8 | Automatic 3 Spd |
Years | Vehicle | Engine | Transmission |
---|
Fitment Notes: Except 4.1 Gear Ratio |
Position: At Transmission |
1990 | Ford E250 Econoline Club Wagon | 5.8L V8 | Automatic 3 Spd |
Years | Vehicle | Engine | Transmission |
---|
Fitment Notes: with 3.54 Rear Axle Ratio |
Position: At Transmission |
1990-1991 | Ford E250 Econoline Club Wagon | 5.8L V8 | Automatic 3 Spd |