Eco Ultrasonics' Sensitive Metal Cleaner Concentrate is a pH neutral and environmentally friendly solution for use in ultrasonic baths, which works at a lower temperature than rival products.

The solution is specially formulated to remove oily residues, grease, general dirt, carbon, aluminium oxidation etc. from sensitive metals including aluminium, copper, zinc, tin, alloys and brass.

Built-in corrosion inhibitors mean it is safe to use on all metals and will not damage or darken components.

It works best at about 40°C - compared to 60-70°C against rival products. Saving you time and money. 

It also works well in tap water - both hard and soft - whereas most rival products require deionised or demineralised water.

Dilution ratio is 1:10 so 1L will make 10L of solution. 

The solution itself is not hazardous for waste disposal (ie. it can go down the drain) but please be mindful of the contamination of what you are cleaning. If the level of soiling is high, please check your local disposal regulations.

The solution is free from chlorinated solvents, hydrocarbon solvents and high pH caustic solutions. 

After cleaning rinse the surface with water before wiping dry. The solution should be changed fairly regularly for optimal performance.